1/10 Rock Crawler Truck CR-01
click to enlarge
- The body of the car is based upon a Tamiya classic, the Stadium Blitzer, which has been modified, featuring an updated color scheme and brand new marking stickers.
- The shaft driven chassis features a compact planetary gearbox which transfers power to the wheels, and is small enough to enable a lower center of gravity.
- The CR-01 chassis? supreme climbing ability stems from the rigid 4-link suspension with front/rear stabilizers. It is fitted with push rod-actuated oil dampers, with coil springs to act as tension springs. Front and rear 3-bevel differentials are lockable to provide even better traction off-road.
- Tires with side tread patterns provide further-enhanced grip.
This is a CR-01 Rock Crawling chassis which has been outfitted with a modified Stadium Blitzer body. The CR-01 Chassis features a 4-link suspension with a number of features that enable driving on extremely bumpy and uneven terrain.
This is the electric powered, radio controlled, 1/10 scale Tamiya Rock Socker Off Road Rock Crawler Truck Kit. FEATURES: Chassis: CR-01 dedicated crawler chassis with heavy duty ladder frame pressed aluminum channels and resin cross members Drive: Four wheel solid axle Motor: 540 size brushed Ball Bearings: Full set included Shocks: Oil-filled, plastic body Gearbox: Planetary type, compact to enable a low center of gravity Transmission: Single speed Tires: Rubber, block pattern Wheels: Black plastic 1.4" (36mm) wide, 2.8" (71.2mm) diameter, 12mm hex Body: Lightweight clear polycarbonate Bumper: High impact front plastic Suspension: Solid axle rigid four link with front & rear stabilizers Differentials: Three bevel gear, lockable to provide better off-road traction Steering: Adjustable, direct link with servo saver Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis INCLUDES: Tamiya Rock Socker Rock Crawler chassis with 20 tooth pinion gear, oil-filled shocks, 540 motor, wheels, body, tires, decal sheet, spur gear, instructions REQUIRES: Radio: 2-Channel with 1 Servo Electronic Speed Control: 540 brushed motor compatible Radio Batteries: AA size Battery: 6-cell stick pack w/standard Tamiya connector Charger: AC/DC timed or peak for 6-cell battery Misc. Items: Paint, building and track equipment SPECS: VEHICLE- Length: 17" (435mm) Width: 10.43" (265mm) Height: 10.47" (266mm) Weight: 5.66lbs (2567g) approx. Wheelbase: 11.34" (288mm) Gear Ratio: BODY- Length: 15.9" (403mm) Width: 5.8" (148mm) Height: 4.2" (106mm) COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 4 8x12mm Link Mounts 2 DTXC1581 2 5x10mm Drive Shaft A 1 DTXC1535 2 5x10mm Drive Shaft B 1 DTXC1535 4 5x10mm Front Uprights 2 DTXC1535 4 5x10mm Rear Uprights 2 DTXC1535 6 5x8mm Planetary Gears 3 DTXC1523 1 10x15mm Planetary Gears 1 DTXC1595 To paint body to match color scheme on box, order the following Tamiya colors; PS-5 Black, TAMR8605 PS-23 Gun Metal, TAMR8623 PS-31 Smoke jxs 3/05/14 ir/jxs