Home » Product Info »
DLEDL30V2

DLE-30v2 30cc Gas Eng w/Muff/EI

Product Info | Substitutions | Optional Items | Fits What?
DL ENGINES

DLEDL30V2
DLE-30v2 30cc Gas Eng w/Muff/EI
By DL ENGINES
$389.99 CAD    
Order Quantity:  
Click to Enlarge
click to enlarge

More like this... Gas Aircraft Motors
But only from... DL ENGINES
All items from... DL ENGINES


 Inventory Status Legend
StockStock availability for on-line ordering
1
$389.99
Warehouse ?
StockStock availability for pick up
1
$389.99
Warehouse ?
0
$389.99
Store - Charlottetown ?
1
$389.99
Store - Edmonton ?
0
$389.99
Store - Mississauga ?
0
$389.99
Store - Ottawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availablility.
Best selling related parts, options and upgrades...
DL30 Inv Wraparound Muffler 
$94.99
  
DL30 Inverted Muffler 
$69.99
  
SPECIFICATIONS
3.7 hp
Claimed Output:
1600 rpm
Idle Speed:
18x8, 18x10, 19x8, 20x8
Prop Range:
NGK CM6
Plug type:
30.5 cc
Displacement:
36 mm
Bore:
30 mm
Stroke:
7.6:1
Compression Ratio:
30:1
Gas/Oil Ratio:
910 g
Engine Weight:
60 g
Exhaust Weight:
120 g
Igition Weight:







click image to enlarge
ADDITIONAL PHOTOS
   
PRODUCT RESOURCES
VENDOR TECHNOTES
    This is the DLE 30cc Gasoline Powered Engine with Electronic Ignition      
and Rear Mounted Carburetor.

FEATURES: Two sealed bearings on crankshaft-simple design for lighter weight
Aluminum alloy crankcase
Rear mounted pumper carburetor ensures easier installation and smooth
idling and dependable fuel flow during flights
Fully automatic electronic ignition
Two year limited warranty through Hobby Services beginning at date
of purchase

INCLUDES: Engine, spark plug, four standoffs, ignition, muffler, muffler
gasket, two 5x20mm muffler bolts, four 5x60mm mounting bolts
instruction manual

REQUIRES: Gasoline with at least 87 octane rating
2-cycle oil, mix ratio for this engine is 30 parts gas to one part
oil and must be followed exactly for warranty consideration
and optimum performance
4.8 - 6V NiMH/NiCd, or 6.6V LiFe or 7.4V LiPo battery for ignition
(separate receiver style pack can be used) (LiPo & LiFe requires
voltage regulator)
Propeller, 1/8" gasoline tubing, and field equipment

SPECS: Output Power: 3.7 HP at 8,500 RPM
Idle Speed: 1,600 RPM
RPM Range: 1,600-8,500
Static Thrust: 8.5kg Pulling Force/100 meters altitude
7.5kg Pulling Force/1,800 meters altitude
Displacement: 1.86cu in (30.5cc)
Bore: 1.42" (36mm)
Stroke: 1.18" (30mm)
Compression Ratio: 7.6:1
Crankshaft Thread: 5mm
Weight: Engine, 2lbs (910g)
Muffler, 2.1oz (60g)
Ignition, 4.2oz (120g)
Gasoline/Oil Mixture: 30:1
Gasoline Octane Rating: 87
Recommended Propellers: 18x8 for break-in, 18x10, 19x8, 20x8
Spark Plug: CM6
Carburetor Adjustments;
Low Speed Needle: 1.5 turns out as a starting point, adjust for a
smooth idle and a reliable transition to high throttle
High Speed Needle: 1.5-2 turns out from closed, adjust needle to peak
RPM, if engine slows or dies at full throttle, the high-speed
mixture is likely too lean
Distance Between Mounting Hole Centers Same Side: 2.1" (54mm)
Distance Between Mounting Hole Centers Opposite Side: 2.7" (70mm)
Height from bottom/Crankcase to top of Cylinder Head: 5.4" (138mm)
Width of Cylinder Head: 2.5" (65mm)
Distance Between Muffler Mounting Hole Centers: 1.3" (34mm)

COMMENTS: To avoid permanent damage to the electronic ignition system, NEVER
turn your DLE engine over with the system switched on and the plug
not installed.


jxs 06/21/10
ir/jxs
Customers who bought this item also bought...
Super Torque MG Univ 0.20/133oz 
$39.99
  
Prop - 9 x 7 
$3.99
  
Tygon Gas Tubing - Medium 1' 
$2.39
  
Servo Extension 6" Std 
$5.99
Kwik Fill Fueling Valve - Gas 
$23.99
  
Gas Conversion Stopper 
$2.89
  
Pro Servo w/BB 0.16/57oz 
$17.99
  
667300800312 0667300800312 
DLEG0031