Walksnail Avatar Mini 1S Kit

 Features
1080P/60fps, 22ms low latency, 3.1V-5V, Power 350mW,
Built-in 8G storage, 6.8g light weight
 

1080P/60FPS,720P/120FPS
The Avatar HD system uses H.265 code,an industry-leading technology,
to provide 1080p FPV image quality with ultra-low latency.

6.8g light weight board
The Avatar mini 1S VTX weights only 6.8g and fits perfectly with the 75X quad.

22ms Low Latency
Supports both high frame rate and standard frame rate,
in high frame rate,it has an average latency of 22ms.
 

8G Built-in Storage
The Avatar mini 1s vtx comes with 8g built-in storage,it can record 1080p
with 60fps or 720pwith 100fps/60fps HD flight videos without interference.

Specifications
    
Camera Model        Avatar nano
Image Sensor      1/2.7”1nch
Resolution       1080P/60fps,720P/120fps,720P/60fps
Ratio           16/9  4/3
Lens      2.1mm
FOV         170°
Aperture         F2.0
Shutter Rolling      shutter
Min. Illumination       0.001Lux
Weight      3.5g
Dimensions      14*14*17mm
Coaxial Cable      55mm?default?/90mm
    
VTX    
Model     Avatar mini 1s module
Communication Frequency     5.725-5.850GHz
Transmitter Power (EIRP)     FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm;
MIC:<25dBm
I/O Interface     JST1.0*6(Power in)JST0.8*4(USB)
Mounting Holes     25.5*25.5mm
Dimensions     30*30*6.5mm
Storage     8G
Recording     1080p/720p
Weight     6.8g
Operating Temperature     -20-40?
Channels     8
Wide Power Input     3.1V-5V
Supported FC System     Betaflight
OSD     Canvas mode
Bitrate     25mbps 50mbps
Latency     Average delay 22ms
Antenna     IPEX
    
VTX Antenna    
Model     Polar antenna
Polarization     LHCP
Bandwidth     5.6GHz-5.9GHz
Average Gain     2dBi
Radiation Efficiency     ≥98%
VSWR     ≤1.4
Connector     U.FL
Line Length     90mm
Dimension     H105mm*R11.2mm
Weight     1.5g
 

Includes: 
Avatar Mini 1S KIT      X1
4 Pin USB Cable     X1
6 Pin Power Cable     X1
M2x3/4mm Screws      X2
M2x16mm Screws       X4
M2 Screw nut      X4
2.1x3.4x1mm Gasket       X5