This live feed
information is to be used as a general guide to current inventory. There is no guarantee of
availability.
SPECIFICATIONS
No
Snap Kit:
1/35
Scale:
260
Parts Count:
1
Photo Etched Parts:
8
Total Sprues:
164.5 mm
Length:
65 mm
Width:
FEATURES
Like the earlier BRDM-1, the BRDM-2 is a fully armored, four-wheel drive, amphibious reconnaissance vehicle with two pairs of belly wheels and a centralized tire pressure regulation system for increased cross-country capability and a single water jet for propulsion through water. Externally, it differs from the BRDM due to a larger, box-like hull. It retains the boat-like bow of the BRDM, but the crew compartment has been moved farther forward and the engine has been moved to the rear. In the basic model, a small conical turret is mounted on the hull in a central position above the belly wheels. There are two front cupolas, and vision blocks are located centrally on both sides. The engine is larger than in the BRDM (140hp V-8 as opposed to 90hp 6-cylinder). The BRDM-2 is fitted with an IR spotlight and IR driving lights as well as an NBC filter system.
