The MXPHY18CK airbrush compressor and airbrush kit uses the golden standard of 1/6 HP for airbrushing, and includes a reliable workhorse airbrush with a standard 0.3mm needle system. A true all in one setup to get you airbrushing with no additional accessories needed!
The primary benefits of this category of compressor is it's versatility in the hobby space. Everything from acrylics, lacquers and enamels can be sprayed due to the adjustable range of 2-45 PSI of working pressure. It even has an auto-off system to significantly reduce wear on the motor and keep the noise produced to a minimum, while keeping the compressor ready for use at all times during your hobby sessions!
It also features upgrades such as two airbrush holders, and a regulator with an auto clamping hose release system for the included coiled hose. The hose is able to be connected and disconnected through a simple press release, and creates an immediate seal. The pressure gauge is also already connected to the regulator, offering an easy to see readout of pressure during adjustments.
This compressor is of a more sleek, painted design for a better looking piece on or under your hobby desk. The large cooling system also allows for better ventilation for extended use.
The included airbrush is a perfect workhorse for beginners and veterans alike. It has all the features and reliability to carry all the common tasks that any hobbyist would be looking for. Amazing for priming, base coating and laying down smooth layers and transitions.
This airbrush includes a standard 0.3mm needle system that will carry any hobbyist through their entire journey, with easily replaceable and affordable parts. It includes the ability to swap out the needle, nozzle and nozzle cap with separately available accessories to either 0.2mm or 0.5mm if desired. It also includes a nozzle wrench and cleaning pipette. It is ideal for both those just starting out, or a veteran looking for a simple solution for their airbrushing needs.
The HS-30 airbrush is capable of using all of the common materials used in the hobby space, from acrylics, to lacquers and enamels. Combined with the included 1/6 HP compressor, you are good to go for all your hobby needs!
Product Includes:
MXPHY18C Compressor
Coiled 1/8" Female to Pressure Clamp Valve Hose
HS-30 Airbrush (w/ 0.3mm Needle Setup)
Required To Use:
Paints, thinner and cleaner!
