Lumenier TinyFISH Power Stack F3 Flight Controller 4A 4n1 ESC/
Discontinued
|
click to enlarge
|
More like this... Multirotor Helicopters, Flight Control Systems
But only from... LUMENIER
All items from... LUMENIER
But only from... LUMENIER
All items from... LUMENIER
This live feed
information is to be used as a general guide to current inventory. There is no guarantee of
availability.
SPECIFICATIONS
3.7V - 4.2V
Operating Voltage:
4.3 Amps
Constant Load:
1.3 g
Weight:
21X21X2mm
Dimensions:
16X16mm
Mounting Dimensions:
BusyBee2
MCU:
FEATURES
- 16x16mm M2 hole-to-hole spacing (20x20mm outer dimension)
- A total weight of 1.2g (!)
- BLHeli_S
- DSHOT600 (rev 0.5 and higher)
- Regenerative breaking
- 4.3A continuous current
- Openhardware + opensource software
The Lumenier tinyFISH Power Stack combines both a F3 Flight Controller and 4A 4-in-1 ESC into a compact stack. It uses a powerful F3 processor along with top of the line hardware. Now you can get all the performance from an F3 based flight controller in a truly micro size! This flight controller uses 16x16mm mounting holes and a low profile design allowing for smaller airframe designs than ever before. The tinyFISH comes with BetaFlight pre-installed. The tinyFISH F3 Flight Controller has a built 8CH SBUS FrSky compatible receiver, making setup a breeze.
**Tech Note: 1S (3.7V) battery input only, do NOT even try 2S it will release the magic smoke and with it any hope of warranty
click image to enlarge
ADDITIONAL PHOTOSCustomers who bought this item also bought...
|
|
|
|
0085883000536 0085883000536
7146