RC8T FT 1/8 Truggy Championshi
RESOURCES
 |
|
|
Discontinued
|
click to enlarge
|
More like this... R/C Nitro 4WD Truggy Racer Kits
But only from... ASSOCIATED
All items from... ASSOCIATED
But only from... ASSOCIATED
All items from... ASSOCIATED
StockStock availability for on-line ordering 
StockStock availability for pick up
This live feed
information is to be used as a general guide to current inventory. There is no guarantee of
availability.
SPECIFICATIONS
RC8T Truggy Championship Edition Kit
Type:
1/8
Scale:
22 in
Length:
16.1 in
Width:
14.8 in
Wheelbase:
9.3 lbs
Weight:
(3mm) thick machined 7075 hard coated aluminum
Chassis:
Clear Lexan (requires painting)
Body:
.21-.28 cu in
Engine Requirements:
2-channel 2-high torque servo
Radio Requirements:
FEATURES
- Pre-assembled shocks, diffs and turnbuckles with Factory Team shock and diff fluids included.
- Factory Team 16mm "Big Bore" threaded, hard-anodized shocks feature heavy-duty 4mm TiN coated stainless steel shock shafts for durability and reduced friction.
- Updated 5mm 7075 blue aluminum shock towers with additional rear camber link options.
- Revised front upper camber link assembly allows for easier adjustments and maintenance.
- 7075 blue aluminum suspension mounts key into chassis for maximum durability.
- Molded bushings allow for easy adjustment of caster, rear toe-in, rear anti-squat, and front kick-up.
- Updated steering geometry for more consistency and reduced bump-steer.
- Molded composite radio tray includes optional forward placement battery box for increased corner speed.
- Molded composite front and rear chassis braces for increased chassis response.
- Blue aluminum Narrow hex adapters with pin retainer clips and nylon locking wheel nuts.
- JConcepts Punisher body features a low profile design for a lower C.G., improved air flow and quicker fueling.
- JConcepts Illuzion wing pre-drilled for RC8T.
- JConcepts tires and foam inserts.
- Three aluminum clutch shoes with full sets of 1.0mm and 1.1mm clutch springs.
- Factory Team 7075 blue aluminum one-piece top plate.
- Lightweight 3mm 7075 hard-anodized chassis.
- 4.30:1 ratio gearboxes with a 14T clutchbell and 54T spur gear.
- Heatsink brake discs with "FFC" Free Float Caliper brake system eliminates unwanted brake drag.
- Two-piece split-center diff mount allows easy access to the center diff.
- 3.5mm light CVA drivetrain with full ball bearings.
- Rear molded CVA boots to keep dirt and mud out of rear joints.
- Lightweight engine mounts.
PRODUCT RESOURCES
784695809123 0784695809123
ASC80912