Home » Product Info »
ZENG26M

Zenoah G-26 Marine

Product Info | Fits What?
ZENOAH

ZENG26M
Zenoah G-26 Marine
By ZENOAH
Discontinued
Click to Enlarge
click to enlarge

More like this... Gas Boat Motors
But only from... ZENOAH
All items from... ZENOAH


 Inventory Status Legend
StockStock availability for on-line ordering
0
$254.99
Warehouse ?
StockStock availability for pick up
0
$254.99
Warehouse ?
0
$254.99
Store - Charlottetown ?
0
$254.99
Store - Edmonton ?
0
$254.99
Store - Mississauga ?
0
$254.99
Store - Ottawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availablility.
SPECIFICATIONS
28 mm
Stroke:
34 mm
Bore:
25.4 cc
Displacement:
2-stroke gasoline marine
Type:
59 oz
Overall Weight:
54 oz
Engine Only Weight:
5 oz
Muffler Weight:
M8 x 1.25 mm
Crankshaft Thread:
65-85 mm
Prop Range:
2,000 - 10,000 rpm
RPM Range:
Gas/Oil Mix
Fuel:
142 x 160 x 181 mm
Mounting Dimensions:
Ring
Cylinder Type:
WT644/WT643
Carb Type:
Ball Bearing
Crank Type:

FEATURES
  • Increased cylinder volume from the G-23M, for increased performance and power
  • Easy to start and adjust
  • Same overall size and mounting dimensions as the G-23M
  • Approximately 20% more horsepower
PRODUCT RESOURCES
VENDOR TECHNOTES
            This is the gasoline powered, water cooled, two cycle              
1.6cu in (26cc) Zenoah G260 PUM Radio Control Marine Engine.

FEATURES: Three needle floatless Walbro carburetor with diaphragm pump allows
fuel tank to be mounted in any position
Cooling jacket
Pull starter

INCLUDES: Zenoah G260 PUM Radio Control Marine Engine with Carburetor, Plug
Wrench, Champion R27C Spark Plug, Plug Wrench, Air Funnel and
Gasket, Muffler Gasket, two 5x50mm Screws and Instruction Manual

REQUIRES: Gasoline: 87 octane or greater
2-Cycle Oil: Klotz makes a synthetic 2-Stroke Oil for R/C
applications (KSFP0310), mix ratio for this engine is 25 - 40 parts
gasoline to one part oil
Gasoline safe fuel tubing, GPMQ4135
Exhaust system depending on application
Muffler - we recommend SUPG1565

SPECS: Idle Speed: 3500RPM
Max Power: 2.16/12,000RPM
Max Torque: 1.94/9,500RPM
Displacement: 1.6cu in (26cc)
Weight: 3.3lbs (1520g)
Distance/Pull Starter to end of Front Crankcase: 5.6" (142mm)
Distance/Pull Starter to center of Engine: 3.4" (87mm)
Cooling Jacket Diameter: 2.1" (53mm)
Height/Starter Attachment Plate to Tip of Spark Plug: 7.1" (181mm)
Height/Center of Engine to Tip of Spark Plug: 5.4" (138mm)
Distance between Mounting Hole Centers Side to Side: 3.7" (95mm)
Distance/Mounting Hole Centers Top to Bottom: 2.5" (63mm)

Carburetor Settings-
Carb is factory set, readjust only if engine is running incorrectly
Idle Screw: Turn clockwise to increase idle and counterclockwise to
decrease idle
Low Speed Needle: 1/4 turn open from maximum RPM position
High Speed Needle: 1/8 - 1/4 turn open from maximum RPM position

jxs 03/30/10
Customers who bought this item also bought...
Big Daddy Fuel Filter Red 
$9.99
  
Vibration Dampener SW55SS 
$9.99
  
605482620892 0605482620892 
ZENG0260