Home » Product Info »

*T*Nobler C/L 35-46 ARF

Product Info

*T*Nobler C/L 35-46 ARF
$174.99 CAD    
Order Quantity:  
No Picture Available

More like this... ARF U-Control Aircraft 30-40
But only from... TOP FLITE
All items from... TOP FLITE

 Inventory Status Legend
StockStock availability for on-line ordering
Warehouse ?
StockStock availability for pick up
Warehouse ?
Store - Charlottetown ?
Store - Edmonton ?
Store - Mississauga ?
Store - Ottawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availablility.
50½ in
500 sq in
Wing Area:
42-50 oz
.35-.46 cu in
Engine 2C:


The original Nobler C/L model kit was "the" plane to have for pilots who wanted to fly precision control line aerobatics. Now it's back, but this is no mere kit re-introduction. Top Flite combines the advantages of modern almost-ready-to-fly engineering with proven Nobler kit performance—for superior maneuvering power with only about 20 hours of assembly needed!

The all-wood, built up main structures have been expertly MonoKote® covered with the same trim scheme featured on the original kit box. The hand-laid fiberglass cowl is factory-painted to match. Bellcrank and lead-out wires are pre-installed in the wing, and convenient three-line fuel tank is included for mounting inside the fuselage. Clear canopy, formed landing gear, wheels and hardware are also supplied. Coupled elevator and flaps increase manoeuvering precision in flight.

               This is the Glow Powered, Almost Ready-to-Fly,                  
Top Flite Nobler Control Line .40 size Model Airplane.

FEATURES: Construction: Balsa and plywood
Wings: One-piece, pre-covered with pre installed bellcrank and cable
Covering: Factory applied adhesive backed Top Flite MonoKote
Cowling: Pre-painted, fiberglass-reinforced
Canopy: Single, clear
Landing Gear: Pre-bent fixed wire, .12" (3mm) diameter with two
2" (65mm) foam wheels, .059" (1.5mm) diameter tail wheel wire
with one " (19mm) foam wheel
Engine Mount: Wooden non-adjustable, built-in to fuselage
Building Time: Ready to fly in only 4-6 hours.
Warranty Period: Top Flite warrants this kit free from defects
in both material and workmanship at the date of purchase. Warranty
does not cover any component parts damaged by use or

INCLUDES: Pre-built and covered fuselage wing and tail sections, wheels,
decals, hinges, hardware, fiberglass cowl, wooden engine mount,
plastic fuel tank, pushrods, and photo-illustrated manual

REQUIRES: Engine: .35-.46 cu in (5.7-7.5cc) 2-stroke
Muffler: Stock type supplied with engine
Control line, handle, and connectors
Misc. Items: medium fuel tubing, spinner, fuel filter, propeller,
fuel line plug, building and field equipment.

SPECS: Wingspan: 50.5" (1285")
Wing Area: 500 sq in (32.2 sq dm)
Wing Loading: 12-14oz/sq ft (37-43g/sq dm)
Weight: 42-50oz (1190-1420g)
Length: 38.5" (980mm) tip of rudder to tip of spinner
Airfoil: Fully symmetrical
Center of Gravity: 2" (65mm) Back from the wing's leading edge on
both sides of the belly pan

COMMENTS: Factory covered with Top Flite Sapphire Blue MonoKote, TOPQ0226
Spinner shown in photo is a 1" (45mm) aluminum, GPMQ4551
Stock numbers for the replacement Canopy and Cowl are wrong
in the instructions. Correct part number for the Cowl is TOPQ8500
and for the Canopy TOPQ8501.
The 4oz metal fuel tank has been updated to a plastic 6oz tank
Stock number for new tank is GPMA2552
jxs 4/29/03
Customers who bought this item also bought...
Steel C/Line .021" x 70' (2) 
Thimble Medium (12) 
Snap Connectors 80lb (2) 
Steel C/Line .018" x 60' (2) 
707768010059 0707768010059