1/10 Zakspeed Ford Capri Gr.5 Jagermeister TT02
click to enlarge
- The 4-wheel independent double wishbone suspension features friction dampers and uses identical L/R suspension arms and uprights for ease of assembly and maintenance.
- Both the motor and the battery are longitudinally-placed in the ABS resin chassis for excellent balance.
- Upright assembly can be changed to give the chassis an extra 4mm of travel for Rally racing.
- Includes Tamiya TBLE-02S ESC (capable of running brushed and brushless motors)
- Includes 540 Torque Tuned motor.
The Zakspeed Ford Capri Turbo Gr.5 was powered by a 4-cylinder DOHC engine and had an instantly-recognizable low and wide form. A 1982 version of the car was decked out in distinctive orange Jägermeister livery and driven to a second place finish in the Salzburg round of the German Racing Championship by the German driver Klaus Ludwig.
Tamiya has faithfully reproduced this sleek racing machine in 1/10 scale on the TT-02 entry level touring car chassis. The TT-02 chassis platform is the successor to the TT-01 as it incorporates many new features to make it even easier for the new R/C kit builder to assemble and learn from. The TT-02 chassis performs well as cornering and overall speed has been enhanced to take advantage of new electronics available on the market. In addition to the TT-02 being an ideal platform to start from, R/C hobbyists can expand its potential by adding many of the Ho-Up-Options available to increase the cars speed and performance.
This is the 1/10 scale, Tamiya electric powered, radio controlled, Zakspeed Ford Capri Gr.5 On-Road Rally Car Kit. FEATURES: Chassis: TT-02 ABS resin bathtub type minimizes contact with the road upright assembly can be changed to give chassis an extra 4mm of travel for Rally racing Drive: Four wheel, shaft driven, with dogbones Motor: Tamiya Sport Tuned 540 brushed with aluminum heat sink Electronic Speed Control: Tamiya TBLE02S brushless compatible Differential: Gear type Wheels: Nylon construction, brake disc detail Tires: Slick rubber with foam inserts Suspension: Fully independent double wishbone Shocks: Plastic body, friction, not oil filled Body: Clear polycarbonate Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bellcrank type Bumper: Front, urethane INCLUDES: Tamiya TT02 Zakspeed Ford Capri Gr.5, with 540 Brushed Motor, Tires, Wheels, Foam Inserts, ESC, Decals and Instructions REQUIRES: Radio: 2-channel with high speed steering servo Battery: 7.2V NiMH Battery Charger: To match selected battery Building and track equipment SPECS: Specs such as finished size of chassis not provided by manufacturer Body; Length: 16.5" (420mm) Width: 8.19" (208mm) Height: 3.89" (99mm) COMMENTS: To upgrade to ball bearings order; Qty. Size Location Qty Bearing Set 2 5x11mm Spur Gear 1 DTXC1547 2 5x11mm Driveshaft 1 DTXC1547 4 8x12mm Differential 2 DTXC1581 2 5x10mm Front Uprights 1 DTXC1535 2 5x10mm Rear Uprights 1 DTXC1535 jxs 03/05/14 ir/jxs