1/10 Toyota Land Cruiser 40 Pickup GF01
click to enlarge
- The polycarbonate body accurately recreates the form of the Land Cruiser 40 with pick-up style rear end.
- Uses front and rear differentials in a sealed gearbox integrated in the frame.
- 4-wheel double wishbone suspension utilizes friction dampers.
- 5-spoke metal-plated wheels are fitted with massive 110mm-diameter tires.
- A driver figure is included.
- Includes Tamiya TBLE-02S ESC (capable of running brushed and brushless motors)
- Special feature 8 Includes 540 Torque Tuned motor.
This is the NEW GF-01 chassis platform. The first model to be featured on the chassis is a pick-up version of the Toyota Land Cruiser 40, a world-famous off-road vehicle that needs little introduction. It was produced for almost 25 years and much loved for its durability and adaptability. The GF-01 chassis plays off the successful and fun line-up of RC kits such as the Wild Willy 2, Volkswagen Type 2 and the Farm King Wheelie. Those kits featured a 2WD and easy to wheelie platform, the new GF-01 is a 4WD incarnation with the motor directly placed in the center in order to drive the gears in the front and rear gearboxes.
This is the Tamiya 1/12 scale Electric Powered, Radio Controlled, Toyota Land Cruiser 40 Pickup Truck Kit. FEATURES: Chassis: Plastic with rear wheelie bar Drive: Four wheel with dogbones Motor: 540 brushed Electronic Speed Control: Tamiya TBLE-02S Differentials: Front and rear in sealed gearbox integrated into frame Body: Clear polycarbonate, with helmeted driver figure Suspension: Fully independent double wishbone Shocks: Plastic body friction Steering: Bellcrank Tires: V-pattern rubber with foam inserts Wheels: 5-spoke plastic 1.8" (47mm) wide, 2.6" (67mm) diameter Bumper: Front spring loaded Camber Tie Rods: Fixed non-adjustable Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis INCLUDES: Toyota Land Cruiser 40 Pickup Truck Kit with ESC, Motor, Clear Body Driver Figure, Tires, Wheels, Shocks, 18 tooth pinion and Instruction Manual REQUIRES: Radio: 2-channel Battery: 7.2V NiMH 6-cell stick pack with standard connector Battery Charger: Compatible with selected battery AA Batteries: For transmitter Paint, building and track equipment SPECS: Vehicle; Length: 13.1" (333mm) Width: 9.6" (244mm) Height: 9.5" (242mm) Body; Length: 12.1" (308mm) Width: 5.7" (146mm) Height: 4.8" (123mm) COMMENTS: To upgrade to ball bearings order; Qty. Size Location Qty Bearing Set 2 5x11mm Differential 1 DTXC1547 8 5x11mm Counter Gears 4 DTXC1547 4 5x11mm Front Uprights 2 DTXC1547 4 5x11mm Rear Uprights 2 DTXC1547 2 5x8mm Steering Linkage 1 DTXC1523 jxs 03/04/14 ir/jxs