1/10 Egress 2013
click to enlarge
- Features a number of carbon fiber-reinforced parts such as upper/lower decks & central torque-splitter diff.
- Lightweight wheels are fitted with hybrid spike tires.
- Newly-designed parts such as ball differentials and universal joints give smooth power transfer.
- Long wheelbase carbon fiber-reinforced chassis is fitted with center one-way.
This is a re-release of the iconic Egress 4WD off-road racing buggy. The Egress first appeared in 1989. It was a follow up kit to the Avante, which had a huge fan following. The original Egress featured stacks of special racing parts. The Egress (2013) builds upon the racy original of the same name, adding modern parts to bring it fully up to speed with available battery and motor technologies available in the hobby market today.
This is the 1/10 scale, Electric Powered, Radio Controlled Egress Off-Road Racing Buggy Kit from Tamiya. Re-issue of the Egress 4WD off-road racing buggy first released in 1989 with modern upgrades compatible with motor and battery technology of today. FEATURES: Chassis: Carbon fiber plate Drive: 4 wheel shaft drive with universals Suspension: Fully independent double wishbone Differential: Ball pressure plate Shocks: Oil-filled Shock Towers: Carbon Wheels: Black plastic Tires: Spiked rubber construction Body: Clear polycarbonate with clear undertray Steering: Bellcrank type Ball Bearings: Full set, shielded Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle INCLUDES: Egress Racing Buggy Kit with Shocks, Tires, Wheels, Body, Decals, and Instruction Manual REQUIRES: Radio: 2-channel with high-torque steering servo Motor: 540 suze ESC: Compatible with selected motor Battery: 7.2V 6-cell stick pack Charger: Compatible with selected battery Building and track equipment SPECS: Vehicle; Length: 16.9" (430mm) Width: 9.6" (243mm) Height: 6.2" (157mm) Body; Length: 12.7" (324mm) Width: 6.4" (164mm) Height: 3.2" (82mm) COMMENTS: For replacement, Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 5x8mm Rear Diff Gear 1 DTXC1523 2 5x8mm Front Diff Gear 1 DTXC1523 2 8x16mm Rear Diff Gear 1 DTXC1585 2 8x16mm Front Diff Gear 1 DTXC1585 1 5x11mm Torque Splitter 1 DTXC1547 1 5x8mm Drive Gear 1 DTXC1523 4 5x11mm Rear Uprights 1 DTXC1547 4 5x11mm Front Uprights 1 DTXC1547 8 5x8mm Steering Bellcranks 4 DTXC1523 jxs 11/27/13 ir/jxs