1/10 Mercedes AMG DTM C Class
click to enlarge
- This is a 1/10 scale R/C assembly model kit of the 2008 Mercedes Benz AMG DTM C Class.
- The polycarbonate body accurately captures the impressive form of the car.
- Shaft driven 4-wheel drive TT-01 Type-E chassis gives this electric R/C car superior control and handling.
- Comes with racing slick tires.
- 2 white and 2 red 5mm LED lights (Total 4) are included.
- Comes with LED Light Unit TLU-01 (Item 53909). *It is possible to assemble with the separately available LED Light Control Unit TLU-02 (Item 53937) which allows up to 16pairs of LEDs (total 32 LEDs) to be controlled.
- ESC and type 540 motor included.
- 2-channel R/C system, battery pack & charger are separately required.
- A wide variety of Option Parts are available for you to further customize your machine.
Featuring throughout the 2008 DTM (German Touring Car Masters) season was the impressive No.6 Mercedes C Class entrant with famed driver Bernd Schneider at the helm.The car proved to be a highly competitive machine and went on to win first place at Round 7 Nurburgring in Germany and third place at Round 9 Circuit de Catalunya in Spain.
This is the 1/10 scale electric powered, radio controlled, Tamiya Mercedes AMG 2008 DTM C-Class On-Road Car Kit. FEATURES: Chassis: TT-01 type E with shock tower now molded separately from the gear case covers and new upper deck with transponder mount, new A parts (Uprights) made of polycarbonate plastic material, new D parts (upper deck, motor cover and more) made of fiberglass- reinforced nylon material Drive: Four wheel shaft drive Motor: 540 size with pre-attached leads Electronic Speed Control: Tamiya TEU-101BK Lights: Tamiya TLU-01 (TAMC1394) LED light unit with four LED lights, see COMMENTS Shocks: Friction, not oil-filled, composite body Gearbox: Sealed front and rear Differentials: Bevel gear Transmission: Single speed Tires: Racing slicks 1.02" (26mm) wide, 2.48" (63mm) diameter Wheels: 16-spoke plastic 1.02" (26mm) wide, 2.04" (52mm) diameter, gray in color Body: Lightweight polycarbonate, requires trimming and painting injection molded side mirrors and rear wing Bumpers: Foam front bumper Suspension: Four wheel independent double wishbone Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering Tie Rods: Fixed non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bell-crank TA-05 type with servo saver Servo Saver: Included INCLUDES: Tamiya Mercedes AMG 2008 DTM C Class, friction shocks, 540 motor, electronic speed control, clear body, tires, foam bumper, wheels 19 tooth pinion gear, 61 tooth spur gear, instructions, LED light unit, window mask and body trim decals REQUIRES: Radio: 2-channel with one steering servo Battery: 6 cell stick pack with standard connector Charger: AC/DC Timed or Peak for 6-cell battery Misc: Polycarbonate safe paint, building & track equipment SPECS: VEHICLE- Length: 17.5" (444mm) Width: 7.4" (187mm) Height: 5.2" (132mm) BODY- Length: 17.5" (444mm) Width: 7.48" (190mm) Height: 4.2" (107mm) COMMENTS: The TLU-02 Light Control Unit (not included) can be installed for more light effects, order TAMC1477. For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 12 5x11mm front & rear diff gears, hubs 6-DTXC1547 4 8X12mm front & rear diff gears 2-DTXC1597 Body pictured on the box is painted silver. jxs 7/13/09 ir/jxs