1/12 Volkswagen Golf Mk.1 Racing Group 2 (M-05)
click to enlarge
vThe Volkswagen Golf Mk.1 was a well-known machine of European touring car racing. The Kamei-sponsored car with its distinctive livery ran in the low-modification Group 2 class of its day.
The Tamiya R/C model faithfully captures the fun and maneuverability of the real life subject as it comes on the proven M-05 M-chassis platform. The M-05 is a simple to build FWD (front wheel drive) machine, which allows for plenty of after-market parts to be outfitted as you grow with your skill.
This is the Electric Powered, Racio Controlled 1/10 scale Tamiya Volkswagen Golf Mk.1 Racing Group 2 On-Road Car Kit. FEATURES: Chassis: M5 resin monocoque design Drive: Front wheel, double cardan driveshafts Differential: Gear type Motor: 540 size, brush equipped ESC: Tamiya TBLE-02 Shocks: Friction, not oil-filled Pinion Gear: 20T Motor Plate: 3mm thick Suspension: Four wheel independent double wishbone Tires: Treaded 60D radial 0.98" (25mm) wide, 2.3" (59mm) diameter with foam inserts Wheels: Gray plastic, 0.94" (24mm) wide, 1.5" (38mm) diameter Body: Clear polycarbonate construction with white plastic grille and driver figure Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Three piece tie-rod linkage INCLUDES: Volkswagen Golf Mk.1 1/10 scale Kit with Clear Body, Brushed Motor, ESC, Tires with Foam Inserts, Wheels, Decals and Instruction Sheet REQUIRES: Radio: 2-channel with standard size servo AA Batteries: Number depends on transmitter Battery: 6-cell stick with standard connector Battery Charger: Peak type recommended Polycarbonate safe paint, building and track equipment SPECS: Body; Length: 12.5" (319mm) Width: 6.7" (170mm) measured at wheel openings (widest point) Height: 3.7" (93mm) Vehicle; Wheelbase: Adjustable, 8.3 (210mm), 9" (225mm) and 9.4" (239mm) COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 3 5x11mm TX Gears 2 DTXC1547 2 5x8mm TX Gears 2 DTXC1523 1 5x11mm Counter Gear 1 DTXC1547 2 5x11mm Front Uprights 1 DTXC1547 2 5x11mm Rear Uprights 1 DTXC1547 4 5x8mm Steering 2 DTXC1523 jxs 01/22/16 ir/jxs