Power System EQ6 - w/o Ign Cutoff
|
click to enlarge
|
But only from... SMART-FLY
All items from... SMART-FLY
- For 85cc to 140cc gas aircraft
- Light weight, 3.7oz, 108g and compact, 6.0†x 3.0†design
- For Li-ion or Li-poly batteries
- Battery inputs protected against battery faults, lost cell or short
- Adjustable servo regulator, 5.5V-6.5V, 7.5amps continuous, 15 amps peak
- 6 of the 8 channels have servo matching and reversing
- Filtered and regulated 5.0V power to receiver
- Receivers can be end-loading or top-loading
- Fully buffered and RF filtered signal line for each servo
- Long servo lead line-matching
The PowerSystem EQ6 combines three Smart-Fly products into one compact, light system. The unit has eight channels, six of which have the Equalizer (servo matching) function built into them. The unit uses Deans Ultra Plug connectors for power and accepts power from dual 2-cell Li-ion or Li-poly batteries. The unit has a built in BatShare to protect against one bad battery affecting the other battery. Power for the receiver is brought straight from the battery connector to a filter and regulator that supplies clean 5.0V power to the receiver. The servo regulator is adjustable from 5.5V to 6.5V and is connected by a large power bus to the servo output connectors resulting in no voltage drop due to wiring or connector resistance. The PowerSystem EQ6 comes in two versions, Standard and Turbo. The standard version is designed for 85cc to 140cc size planes and the regulator can supply 7.5 amps of continuous current with 15 amp peaks. The Turbo version is meant for 150cc and larger size planes and the regulator can supply 17.5 amps of continuous current with 35 amp peaks.
Incompatible with radios that do not use 1.5msec pulse as servo neutral (some older Multiplex radios)
Receiver pictured for reference only. It is not included with this system.