This live feed
information is to be used as a general guide to current inventory. There is no guarantee of
availability.
SPECIFICATIONS
55 in
Wingspan:
1050 sq in
Wing Area:
9.8 oz/ft²
Wing Loading:
46 in
Length:
72 oz
Weight:
600W (Power 32)
Motor Requirements:
3 Channel R/E/T
Radio Requirements:
2
Servo Requirements:
Castle Thunderbird 54
ESC Requirements:
2500 mAh (25C) 11.1V
Battery Requirements:
FEATURES
Stevens AeroModel presents the FREDe (2X) Twice the fun of our original FREDe parkflyer. With 1050 square inches of thick under-cambered wing, a svelte 72 oz flying weight, and 120W/lb power loading; experience GIANT SCALE SLOWFLYING as it was meant to be.
Background:
FREDe™ is a ToonSCALE™ version of Eric Clutton's F.R.E.D. (Functional Runabout Experimental Design) FREDe's airframe frames quickly thanks to precision laser cut components and simple yet thoughtful engineering. This rugged design features our shock mounted landing gear system and soaks up all the bumps and bruises a beginner can deliver. FREDe™ dishes out stable predictable performance with pro pleasing "fun" on tap allowing for all rudder, elevator, throttle aerobatics including flat and falling leaf flat spins! FREDe™ - because flying should be FUN!
Kit Includes:
* Push-Rods and Control Linkages.
* Pre-Bent landing gear
* Spruce Landing Gear Block
* Step by Step Photo Illustrated Instructions
* Leading edge, turbulator, and spar wood stock in full 48 in. lengths
* Limited edition Kris Cartwright FREDe pilot figure
* Cockpit Combing and Interior.
Kit Requires:
#11-G Trexler Balloon Wheels or 4-1/2in. Foam Wheels
Suggested Electronics:
Motor - E-Flite Power 32 (EFLM4032A)
Propeller - 15x8 APC E
Battery - 3S 11.1V 3300-4200 LiPo (Hyperion - 3S 11.1V 3300)
ESC - High Quality 50-60A ESC (Castle Creations Thunderbird 54)
SERVOS - 2 Standard Servos (Hitec HS322HD)
Suggested Finishing Items:
3-4 Rolls AeroFILM covering
Sanding Bar with 250, 400, and 600 grit paper
Sharp Hobby Knife with #11 blades
Razor plane
5 or 30 Min Epoxy
1 oz of Thick, Medium, and Thin CA glues
Balsa Filler
