This live feed
information is to be used as a general guide to current inventory. There is no guarantee of
availability.
FEATURES
Nearly 2″ (49mm) wide
1″ (25mm) extension in front of the chassis
Hangs more than .02″ (0.5mm) below the chassis for chassis protection
Weighs only 7.5g.
Replaces stock Associated #91685.
The Team Associated B6 & B6D is a race-bred machine built to dominate the track. However, it has no provisions for those “oops” moments that invariably happen. That’s where we step in! Our Mini Front Bumper replaces the stock hinge pin retainer (the stock piece is not a bumper) and provides roughly 1” (25mm) of forward extension and nearly 2” (49mm) of width to help protect the front end of the vehicle. That means direct frontal impacts won’t transfer 100% of that damaging impact energy into the front bulkhead / chassis / shock tower. Instead, our bumper will absorb a huge amount of that energy, making sure you can continue to compete instead of being pulled off the track by the turn marshal.
Each RPM B6 & B6D Front Bumper also extends below the level of the chassis by 0.02” (.5mm) to help reduce the amount of scuffing and damage taken to the front of the stock aluminum chassis plate.
RPM Mini Front Bumpers for the B6 & B6D are extremely lightweight, weighing in at a mere 7.5 grams. RPM bumpers are extremely strong and some of the most durable and impact-absorbing bumpers on the market. Each bumper is backed by our limited lifetime warranty against breakage. Protect that awesome race machine with a proven performer.
Tech Notes: RPM Front Bumpers for the Associated B6 & B6D replace stock Associated #91685.
