Home » Product Info »

Extra 260 ARF - Red/White

Product Info | Required Items

Extra 260 ARF - Red/White
Click to Enlarge
click to enlarge

More like this... ARF Park Flyer Electric Aircraft

 Inventory Status Legend
StockStock availability for on-line ordering
Warehouse ?
StockStock availability for pick up
Warehouse ?
Store - Charlottetown ?
Store - Edmonton ?
Store - Mississauga ?
Store - Ottawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availablility.
48 in
490 sq in
Wing Area:
9.9 oz/ft²
Wing Loading:
33.7 oz
Radio Included:
Receiver Included:
Servo(s) Included:
Brushless Motor Included:
ESC Included:
Battery Included:


PA approached the new design with their customers’ “wish-list” in mind and with FiberFusion® construction technology under their belt. The result is an amazing aircraft designed for unlimited aerobatic performance with a level of precision demanded by today’s Freestyle Competitions.

While the Extra is larger than the PA Katana MD and features fully air-foiled tail section it is actually LIGHTER than the Katana MD! This means the new 260 is now the lightest model in its size category, yet it is one of the robust models available on the market today.

Designed with a technical challenge of having both precision and extreme agility in mind, the PA Extra 260 will perform the most demanding aerobatics maneuver with the finesse of precision to boot, providing unparallel predictability that will take your aerobatic performance to another level.

The 260 excels in all tumbling maneuvers. Violent walls, violent snaps, spins (representative of full-scale aircraft) are just some of the high-speed, high-energy maneuvers the Extra 260 is capable of performing. On the post-stall extreme freestyle end, the Extra 260 is fully capable of executing one of the best, well balanced rolling harriers (extremely slow and persistent), slow stable harriers (both upright and inverted) with absolutely no wing rock. Extremely stable elevators (allowing long elevators all the way down to a spot landing), tight and stable harrier turns. Transitions into high Alpha are extremely smooth and stable. The 260 also Knife Edges with the accuracy to perform KE circuits adds a further dimension of precision to the overall flight performance. In a nutshell this is the Extra with THE ALL THE EXTRAS thrown in!

For maximum aerodynamics, the aileron design and construction of this model is exceptional, made in such a way that the hinge gap is completely sealed. This is quite complex to produce: the ailerons fit into the wing trailing edge tunnels and are glued and pre-aligned in the factory. Despite the laborious production of this design, PA decided to produce the ailerons this way, as it allows perfect aerodynamic flow over the airfoil and results in maximum efficiency of the control surfaces.

Like any other Precision Aerobatics model, the Extra 260 is built using finest grade material, all cut by state-of-the-art laser and CNC machines. As always, the list of carbon fiber parts is long and impressive.

The two wing halves are removable making it easily transportable for a model of this size, yet compact enough to be transported fully assembled for added convenience, if desired. The carbon fiber wing tube and wing/fuselage sleeve add to the overall strength and rigidity of this aircraft.

In line with PA’s tradition, this model takes the word QUALITY to the next level. From the design to the construction, the hardware and the level of finish - the attention to detail is second to none. The wings are matched individually to each fuselage just like their giant scales models and the model is already 99% built for you in the factory consisting of:

  • Wings and ailerons that are pre hinged and sealed!
  • Pre-installed airfoil vertical stabilizer
  • CA hinges already pre-glued on the rudder side and CA hinge slots pre-cut on the fuselage side.
  • Airfoil horizontal stabilizer with the elevator pre-hinged and sealed.
  • Anti rotation pins are pre glued
  • The pre cut cowling is made of fiberglass and is reinforced with carbon fiber. Its aerodynamic design allows air to flow in and cool the motor, battery and ESC for maximum setup efficiency. Two air scoops are also included in the kit.
  • Prefabricated and pre-painted tinted canopy and hatch as one integral unit attached to the model with very strong magnets.
  • High quality prefabricated kevlar pull-pull system already pre-glued and crimped.
  • Pre drilled stiff CF landing gear and pre-installed blind nuts in the fuselage for quick installation.
  • The motor box is pre-glued with the correct thrust line already built in (taking away the guess work).
  • The composite firewall is pre-drilled ready for any standard A30 class size outrunner installation.
  • Wheel pants are pre cut (optional carbon wheel pants are available)
  • Semi-fabricated CF push rods.
  • Pre-drilled CF control horns and Pull-Pull CF servo arm.
  • Pre-installed battery and RX Velcro fasteners.
  • Pre-assembled tail wheel.

The brief assembly is a joy and most modellers will have it set up in one evening. Also included is a deflection gauge to ensure precise control deflection is easily achieved to attain the designed handling characteristics.

So if you demand precision flying with unrestricted freestyle and 3D agility, the PA Extra 260 is the ultimate no-holds-barred, high performance aerobatics machine that delivers. Its time to take yourself to the next level!