SOLVENT-BASED ACRYLIC PAINT
Mr.COLOR has long been regarded highly by modellers worldwide as a model paint that delivers an outstanding finish. Wide range of colors are available, and these are suitable for military tanks, aircrafts, car models, robot models, and many more.
Mr. COLOR is available in a wider range of colors and finishes than AQUEOUS HOBBY COLOR. Compared to AQUEOUS HOBBY COLOR, it has a faster drying speed and its paint film is stronger.
Suitable for airbrushing and hand brushing
BRUSH PAINTING:
1 : 0.8~1.0 (Mr. COLOR : Mr. COLOR THINNER)
AIRBRUSHING:
1: 1~2 (Mr. COLOR : Mr. COLOR THINNER)
Mr. LEVELING THINNER IS RECOMMENDED FOR AIRBRUSHING
Use Mr. COLOR THINNER, Mr. COLOR LEVELING THINNER or MR.COLOR RAPID THINNER.
Do not thin with THINNER FOR AQUEOUS HOBBY COLOR and ACRYSION SOLVENT.
HOW TO APPLY Mr. COLOR
- Apply 1 to 2 coats if painting with a paint brush or 2 to 3 coats if airbrushing.
- After applying a coat of Mr. COLOR, let it dry for a few hours. After the first coat is completely dry, apply a second coat.
- Use T114 Mr. Paint Remover to remove paint from a surface.
- Clean the tools with Mr. COLOR THINNER or Mr. TOOL CLEANER.
- Mix approximately 5 to 10% of C30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish.
- Mr. HOBBY TOPCOAT and SUPER CLEAR can be applied over a coat of Mr. COLOR.
- Do a test paint before you apply paint on your model kit.
ATTENTION:
- Put the lid back on after use.
- Store in a cool and ventilated place, away from direct sunlight.
- Use in a well ventilated area.
- Made in Japan.
MIXING
CAN BE MIXED WITH:
Mr. COLOR
Mr. COLOR GX, Mr. METALLIC COLOR GX, Mr. CLEAR COLOR GX
Mr. COLOR 40TH ANNIVERSARY, Mr. CRYSTAL COLOR, Mr. SUPER METALLIC
LASCIVUS
CANNOT BE MIXED WITH:
× AQUEOUS HOBBY COLOR
× ACRYSION, ACRYSION BASE COLORS
× CLASSY 'N DRESSY COLORS
× Mr. METAL COLOR
AQUEOUS HOBBY COLOR and ACRYSION can be applied over a coat of Mr. COLOR.
Mr. COLOR cannot be applied over a coat of AQUEOUS HOBBY COLOR and ACRYSION.
