Home » Product Info »
GPMG0202

Gearbox S280 Std 4.1:1 Ratio

Product Info | Fits What?
GREAT PLANES

GPMG0202
Gearbox S280 Std 4.1:1 Ratio
By GREAT PLANES
Discontinued
Click to Enlarge
click to enlarge

More like this... Motor Accessories, Gear Boxes
But only from... GREAT PLANES


 Inventory Status Legend
StockStock availability for on-line ordering
0
$19.99
Warehouse ?
StockStock availability for pick up
0
$19.99
Warehouse ?
0
$19.99
Store - Charlottetown ?
0
$19.99
Store - Edmonton ?
0
$19.99
Store - Mississauga ?
0
$19.99
Store - Ottawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availablility.
FEATURES

These gear boxes are real "efficiency-boosters" for the smaller 280-size electric motors that are popular with today's Park Flyer airplanes. They maximize battery capacity for longer flight times, while allowing you to utilize bigger props as well.

Compatible with the APC Slow Flyer Propellers

PRODUCT RESOURCES
VENDOR TECHNOTES
    This is a S280 Gearbox with 4.1:1 Gear Ratio and uses Standard Bushings.   
For use with the Great Planes Park Flyers.

FEATURES: Designed for low noise and low maintenance, Park Flyer gearboxes used
with 280-sized motors get the maximum climbing power and flight
time from each mAh. A brass pinion gear is used for strength and
a nylon main gear for quiet, low friction operation.
Compatible with APC's light, durable Slo-Flyer Propellers
Economical bronze bushings for long-lasting sport use
Lightweight, fiber-reinforced, sealed gear case keeps out dust and
debris as well as resists damage.

INCLUDES: One assembled S280 gearbox 4.1:1 ratio
One brass 11 tooth pinion gear (GPMG0242)
Three 2x6mm self-tapping gearbox mounting screws
One mini tube of Thread Locker to secure pinion to the motor shaft

REQUIRES: Install pinion onto motor shaft, then into the gearbox.
Assembly of unit onto the airplane
Prop Adapter

SPECS: Overall Length: 37mm (1.5")(back of motor shroud to front of case)
Overall Height: 35.8mm (1.4")(motor shroud and gear case)
Motor Shroud Inner Diameter: 24mm (.9")
Gear Case Outer Diameter: 30.5mm (1.2")
Mounting Hole Flanges On-Center: 33.3mm (1.3")(three, evenly spaced)
Shaft Length: 7.3mm (.3")
Shaft Diameter: 3mm (.12")
Weight: 15 grams

COMMENTS: For T-280 motor, use GPMG0300.
For T-280 motor and gearbox, use GPMG0445.
For T-280 motor, gearbox and Electronic Speed Control, use GPMG0430.

JXS 12/01/00
ir/jl
735557302023 0735557302023 
GPMG0202