Home » Product Info »

ElectriFly F-16 Falcon EDF ARF

Product Info | Replacement Parts

ElectriFly F-16 Falcon EDF ARF
No Picture Available

More like this... ARF Park Flyer Electric Aircraft
But only from... GREAT PLANES
All items from... GREAT PLANES

 Inventory Status Legend
StockStock availability for on-line ordering
Warehouse ?
StockStock availability for pick up
Warehouse ?
Store - Charlottetown ?
Store - Edmonton ?
Store - Mississauga ?
Store - Ottawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availablility.
Best selling related parts, options and upgrades...
F-16 Falcon EDF ARF Wing Set 
F-16 Falcon EDF ARF Bungee Hook Set 
F-16 Falcon EDF ARF Tail Surface Set 
F-16 Falcon EDF ARF Cone Adapter 
F-16 Falcon EDF ARF Front Housing Flange 
F-16 Falcon EDF ARF Hatch 
F-16 Falcon EDF ARF Fuselage 
F-16 Falcon EDF ARF Decals 
22.5 in
166 sq in
Wing Area:
27.8-29.5 oz/ft²
Wing Loading:
34.5 in
32-34 oz
4-channel minimum
Radio Requirements:
4-channel minimum
Receiver Requirements:
4 micro servos
Servo Requirements:
35A Brushless
ESC Requirements:
14.8V (4S) 2100 - 2500 mAh LiPo
Battery Requirements:
Ducted Fan Included:
Ammo 24-45-3790
Electric Motor Included:

  • Includes a HyperFlow™ ducted fan unit and high-performance Ammo™ brushless motor.
  • The fiberglass fuselage is factory-painted, while the built-up wings and stabilizer are factory-covered in MonoKote film.
  • Aileron, elevator and rudder controls result in outstanding authority for precision landings and high-speed maneuvers.
  • Includes bungee launcher, profile pilot and display stand

Praised by pilots for its versatility, the F-16 Fighting Falcon has been the preferred fighter for over 25 countries since the late 1970s. ElectriFly recreates the F-16's innovative design in a ducted fan ARF that combines scale looks with impressive top-end speeds!

WARNING: The F-16 Fighting Falcon requires advanced flying skills and is not suitable for beginning or intermediate pilots. It reaches speeds over 90 mph (145 km/h), and should only be flown at an approved AMA flying site. Because it can quickly disappear from sight, pilots should remain focused on the plane at all times.

The HyperFlow ducted fan unit with Ammo 24-45-3790 inrunner brushless motor produces impressive thrust and speed — and provides "jet" excitement in a convenient size.

The magnetically attached canopy doubles as a battery hatch, simplifying the installation of LiPos and radio gear.

Ailerons, elevators and rudder control make the F-16 highly maneuverable, for slow fly-bys and full-throttle excitement.

The F-16 can be hand-launched, or you can take advantage of the included bungee launcher for even easier launching. Also ideal for assembly, the display stand lets you show off your F-16 when it isn't airborne.

click image to enlarge
This is the brushless electric powered, radio controlled, almost ready to fly  
ElectriFly F-16 Falcon EDF.

For advanced RC pilots, not suitable for beginning or intermediate pilots.
This ducted fan jet reaches speeds over 90 mph (145 km/h),
and should only be flown at the flying site of an AMA-chartered club.
Because it can quickly disappear from sight, the pilot should remain
focused on the plane at all times.

FEATURES: Construction: Fiberglass fuselage with balsa and ply wing and tail
Wing: Balsa and ply, covered in Top Flite MonoKote
Ducted Fan Unit: Hyperflow 56mm fan
Aileron Control: Dual servo
Motor: ElectriFly Ammo 24-45-3790kV brushless inrunner
Canopy: Clear with lightweight profile pilot, attaches with magnets
Launching System: Bungee type for easy unassisted launches
Stand: Plywood

INCLUDES: ARF ElectriFly F-16 Falcon EDF Airplane with Motor, Ducted Fan,
Display/Assembly Stand, Launching System, Instruction Manual

REQUIRES: Radio: Four channel
Servos: Four micro (2-aileron, 1-rudder, 1-elevator)
6" (152mm) Extensions: Two for aileron servos
Dual Servo Extension: Required if aileron servos will not be mixed
ESC: 35A, brushless compatible
Battery: 14.8V LiPo
Charger: LiPo compatible
Building and field equipment

SPECS: Wingspan: 22.5" (570mm)
Length: 34.5" (875mm)
Wing Area: 166 sq in (10.7sq dm)
Weight: 32 - 34oz (910 - 960g)
Wing Loading: 27.8 - 29.5oz/sq ft (85 - 90g/sq dm)
Center of Gravity (CG): 3-1/4" (83mm) back from the leading edge of
the wing where it meets the fuselage
Control Throws: Low Rate High Rate
Elevator 3/16" (9mm) 9 5/16" (8mm) 14
Rudder 1/4" (6mm) 14 11/32" (9mm) 20
Ailerons 1/8" (3mm) 7 3/16" (5mm) 10

COMMENTS: Following are the Top Flite MonoKote colors used to cover the wings
and horizontal stabilizer and order numbers for 6' rolls;
White, TOPQ0204 True Red, TOPQ0227

jxs 03/02/11
735557018016 0735557018016