Pre-painted fiberglass cowl, wheel pants, and landing gear
Full hardware set included
The 50" class is an exciting, emerging category of electric aircraft, and the Edge 540T is sure to be a standout! Slightly smaller than traditional .40 glow models, 50" class planes boast many sophisticated features that discriminating pilots look for in an aerobatic ARF. The Edge 540T, the first in the E-Performance XLC (Extreme Light Concept) Series, takes those features a step further — resulting in a spirited performer that takes full advantage of advanced ElectriFly engineering and pre-fabrication to instantly become a leader in this bold new market!
This is the electric powered, radio controlled, almost ready to fly ElectriFly Edge 540T Aerobatic Airplane. This 50" class Edge 540T is part of the ElectriFly E-Performance Series. FEATURES: Construction: Balsa and ply with prehinged ailerons and rudder and airfoiled control surfaces, motor box preinstalled with blind nuts providing perfect spacing for spinner backplate-no need for measuring, cowl ring also preinstalled Wings: Two piece with carbon fiber wing joiner Covering: Top Flite MonoKote Aileron Control: Dual servo Cowl: Prepainted fiberglass Wheel Pants: Prepainted fiberglass Landing Gear: Prepainted fiberglass Wheels: Main-two foam 2-1/4" (57mm) diameter, tailwheel 3/4" (19mm) diameter Spinner: Plastic, white in color 2.25" (57mm) diameter Hardware: Full set included Building Time: Approximately 6-8 hours Warranty: Great Planes Model Manufacturing Company guarantees this kit to be free from defects in both materials and workmanship at date of purchase. INCLUDES: ElectriFly ARF Edge 540T Aerobatic Airplane with fiberglass cowl, wheel pants and landing gear, wheels, hardware and photo- illustrated instruction manual REQUIRES: Radio: 4-5 channel Servos: 4-micro Y Harness: For aileron servos 12" (305mm) Extensions: Two 16" (406mm) Extensions: Two Motor: Rimfire brushless outrunner 42-50-800kV, GPMG4700 Voltage Regulator: CSEM0005 45A ESC for Brushless Motors: GPMM1840 Battery: LiPo 2100mAh Cell Balancer: For LiPo battery Battery Charger: LiPo compatible Propeller: 13x8E for sport setup 12x6E for 3D setup SPECS: Wingspan: 49.5" (1260mm) Wing Area: 490 sq in (31.6 sq dm) Weight: 3.25 - 3.5lb (1470 - 1590g) Airfoil: Fully symmetrical, mid wing placement Wing Loading: 15 - 16oz/sq ft (46 - 49g/sq dm) Length: 48" (1220mm) Center of Gravity: 2-13/16" (71mm) back from the leading edge of the wing at the side of the fuselage Control Throws- Low Rate High Rate 3D Elevator: 1/2" (13mm) 8° 3/4" (19mm) 12° 2.5" (64mm) 42° Rudder: 2" (51mm) 17° 3.5" (89mm) 30° 5" (127mm) 45° Ailerons: 1/2" (13mm) 10° 3/4" (19mm) 15° 1-3/4" (44mm) 40° COMMENTS: Following are the MonoKote colors used on this model and stock numbers for six foot rolls; White TOPQ0204 Sky Blue TOPQ0206 Sapphire Blue TOPQ0226 Royal Blue TOPQ0221 Medium Purple TOPQ0225 jxs 7/24/08 JiM 11.20.08 ir/jxs