Home » Product Info »
GPMA1542

Yak 54 3D EP ARF

Product Info | Required Items | Replacement Parts
RESOURCES

Items Required to Complete (18)
Replacement Parts (1)
GREAT PLANES

GPMA1542
Yak 54 3D EP ARF
By GREAT PLANES
Discontinued
Click to Enlarge
click to enlarge

More like this... ARF Park Flyer Electric Aircraft
But only from... GREAT PLANES


 Inventory Status Legend
Stock availability for on-line ordering
0
$149.99
Warehouse ?
Stock availability for pick up
0
$149.99
Warehouse ?
0
$149.99
Store - Charlottetown ?
0
$149.99
Store - Edmonton ?
0
$149.99
Store - Mississauga ?
0
$149.99
Store - Ottawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availablility.
SPECIFICATIONS
41 in
Wingspan:
287 sq in
Wing Area:
19.5 oz
Weight:
9.8 oz/ft²
Wing Loading:
36 in
Length:
4-channel 4-micro servo
Radio Requirements:
Brushless
Motor Requirements:
25A Brushless
ESC Requirements:
3-cell LiPo
Battery Requirement:

FEATURES
  • Pre-covered and Almost Ready to Fly with built-up wood structure
  • Lightweight painted fiberglass cowl and wheel pants
  • Handles well in winds up to 10-15 mph
  • Includes lightweight composite hardware designed specifically for electronic flight performance
  • Oversized ailerons
  • Designed to use in-runner or out-runner brushless motors

VIDEO



PRODUCT RESOURCES
VENDOR TECHNOTES
      This is the radio controlled, electric powered, Almost-Ready-to-Fly,     
Great Planes ElectriFly E-Performance Series YAK 54 3D Park Flyer Airplane.
Park Pilot Program Legal Aircraft
For Intermediate Modeler/Fliers at least 14 years of age.

FEATURES: Construction: Laser cut balsa and plywood
Wings: Factory covered, built-up wood with oversized ailerons
Tail section: Factory covered, built-up wood construction with over-
sized control surfaces
Covering: Factory applied lightweight film
Cowl: Fiberglass construction, factory painted to match covering
Battery and Motor Compartment: Magnetic latches elimimate screw
fasteners for cleaner appearance and better aerodynamics
Landing Gear: Formed aluminum, factory painted in White
Wheel Pants: Vacuum formed plastic, factory painted in Red
Wheels: Lightweight 1.75" (45mm) diameter foam wheels
Spinner: 1.75" (45mm) diameter, Red plastic construction
Hardware: Molded from composite materials for precise response and
weight savings, included servo arms do not fit Hitec servos
Building Time: Ready to fly in only 4-6 hours.
Warranty: Great Planes Model Manufacturing Company guarantees this
kit free from defects in both materials and workmanship at
the date of purchase.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,

REQUIRES: The ElectriFly Park Flyer E-Performance Power System
includes the following required components in one package
Silver Series 35A Brushless Electronic Speed Control
35-30-1250kV Brushless Outrunner Electric Motor
LiPo 2100mAh 11.1V 20C Battery Pack w/Balance Connector

Propeller: 10x7E Slo-Flyer Electric propeller - (APCQ5018)
Battery Charger: LiPo compatible - (GPMM3010)
Radio: 4-channel with micro receiver
Servos: Four micro size - (FUTM0414)
Servo Extensions: Two 6" (152mm) Slim Wire (FUTM4506) and
One Dual Servo Extension (FUTM4130)
Misc. Items:
building and field equipment

SPECS: Wingspan: 41" (1040mm)
Wing Area: 356 sq in (23 sq dm)
Weight: 24-27oz (680-765g)
Wing Loading: 9.7-10.9 oz/sq ft (30-33.26 g/sq dm)
Length: 38" (960mm)
Airfoil: Fully-Symmetrical
Center of Gravity: 3-1/8" (79mm) Back from the wing's leading edge
Control Throws- High Rate Low Rate 3D Rate
Elevator: Up & Down 1-1/8" (28mm) 5/8" (16mm) 2" (51mm)
Rudder: Right to Left 2" (64mm) 1" (32mm) 3" (89mm)
Ailerons: Up & Down 7/8" (22mm) " (13mm) 1" (38mm)

jxs 8/17/06
kpm11/06/2006
735557015428 0735557015428 
GPMA1542