Home » Product Info »

*F*Extra 330SC 3D Indoor ARF 3mm

Product Info

*F*Extra 330SC 3D Indoor ARF 3mm
$69.99 CAD    
Order Quantity:  
No Picture Available

More like this... Slow/Indoor Flyer Electric Aircraft Kits
But only from... GREAT PLANES
All items from... GREAT PLANES

 Inventory Status Legend
StockStock availability for on-line ordering
Warehouse ?
StockStock availability for pick up
Warehouse ?
Store - Charlottetown ?
Store - Edmonton ?
Store - Mississauga ?
Store - Ottawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availablility.
32.5 in
267 sq in
Wing Area:
3.3-3.7 oz/ft²
Wing Loading:
35 in
6.2-6.8 oz
Radio Requirements:
3-micro servo
Servo Requirements:
Electric Motor Requirements:
8A Brushless (mini)
ESC Requirements:
7.4 300mAh 20C
Battery Requirements:


The Extra 330SC performs 3D the same way it assembles: with virtually effortless ease and impressive results! Simplicity and factory-installed extras push assembly time to the minimum, while an all-up weight of just over 6 ounces pushes performance to the limit!

All control surfaces are prehinged. The carbon-fiber wing spars are factory-installed, adding strength without extra weight or work. Simplified, laser-cut hardware and clever alignment jigs add even more time savings, cutting bench time to the bone!

At just over six ounces, the Extra 330SC performs brilliantly on a RimFire™ 250 — the smallest outrunner motor ElectriFly makes!

Large control surfaces and maximum throws put the wildest 3D aerobatics within easy reach.

All control surfaces are prehinged with 3M® Blenderm® for toughness, time-savings and assembly ease.

Team Futaba member Jason Danhakl with the Extra 330SC prototype and the pilot’s award for "Best Sport Performance" he won at the 2009 JR Indoor Festival.

 This is the radio controlled, brushless electric powered, almost ready to fly 
ElectriFly Extra 330SC 3D Foam Plane.
For indoor or outdoor flying.
Park Pilot Program Legal Aircraft

FEATURES: Construction: 3mm extruded polystyrene Pro-formance foam, an
ElectriFly exclusive, control surfaces are prehinged with 3M
Blenderm tape hinges
Wing: One-piece with factory installed carbon fiber wing spars
Motor Mount: Pre-drilled plywood
Landing Gear: Wire
Wheels: Five-spoke, black nylon
Warranty: Great PlanesŪ Model Manufacturing Co. guarantees this kit
to be free from defects in both material and workmanship at the
date of purchase. This warranty does not cover any component
parts damaged by use or modification.

INCLUDES: ElectriFly Extra 330SC 3D Foam Plane with landing gear, wheels,
motor mount, pushrods, carbon rods, brace doublers, control horns
and instruction manual

REQUIRES: Radio: 4-channel with mini receiver
Servos: Three micro high torque
For Indoor Flight Performance-
Motor: RimFire 250 (GPMG4502)
Battery: 7.4V 300mAh LiPo
ESC: 8amp Brushless (GPMM1800)
Propeller: 8x4E (APCQ5000)
For Outdoor Flight Performance-
Motor: RimFire 300 (GPMG4505)
Battery: 11.1 volt 300mAh
ESC: 8amp Brushless (GPMM1800)
Propeller: 8x4E
Battery charger and building & field equipment

SPECS: Length: 35" (890mm)
Wingspan: 32.5" (825mm)
Wing Area: 267 sq in (17.2 sq dm)
Wing Loading: 3.4 - 3.7oz/sq ft (10 - 11g/sq dm)
Weight: 6.2 - 6.8oz (175 -195g)
Center of Gravity: 5/8" (16mm) aft from the carbon strip in the wing
Control Throws-
Low Rate High Rate 3D
Elevator: 1" 25mm 18° 1-7/16" 35mm 25° 2" 50mm 38°
Rudder: 1-5/8" 41mm 19° 2-5/8" 67mm 32° 3-3/4" 95mm 29°
Ailerons: 1" 25mm 13° 1-3/4" 44mm 22° 3-3/4" 95mm 56°

jxs 12/02/09
Customers who bought this item also bought...
Prop Slow Flyer - 8 x 3.8 
Rimfire 250 Outrunner BL Motor 
Servo - Micro Hi-Torq 
CA Foam Safe Thin/Medium 1oz 
Insta-Set CA Accelerator FS Pump Spray 2oz 
Foam-Tac Adhesive 2oz (59ml) 
ESC Pro Brushless 10A 
Prop Electric Thin - 8 x 4 
735557011291 0735557011291