Now made with the new Maker Foam the Flite Test Tiny Trainer is even better! The Tiny Trainer Mighty Mini is specifically designed to cover all the basics when it comes to RC Flight. Whether you are a beginner yourself, or if you are trying to bring a newcomer into this wonderful hobby, the Tiny Trainer will assist them in making every flight a great experience! This plane can be built and converted into 4 different designs that will guide you through every level of getting started flying.
Educators, group leaders, and parents looking to make a memory with a loved one can build the Tiny Trainer as a free flight (hand tossed) glider or a powered RC airplane. A little clay in the nose for balance, and your ready to toss the plane back in forth with a friend! Remove the clay and add 2 servos and you have a great 2 channel glider to learn elevator and rudder control. Swap out your glider nose for the powered nose and enter into the world of 3 channel flight. Once you are comfortable with slow lazy eights and graceful loops, remove the polyhedral wing and replace it with the included sport wing. The sport wing will teach you bank and yank skills and enter you into world of aerobatics and precision flight. Install a 3 cell battery and go from cruising to cutting up the sky with vertical lines and exhilarating speed.
The Tiny Trainer will also get you up to speed with techniques used with all FT designs. Every technique from "A Folds" to Folding wing airfoils will be used in this one build.
This airframe was developed around our Power Pack A electronics kit which is used with the Mighty Mini Series.
Power Pack Compatibility:
Flite Test Airplanes are all designed around the use of various "Power Packs" which include an inexpensive Motor, ESC, Servo, & accessory package to complete each aircraft!
Maker Foam Features:
White color is much easier to add a simple trim scheme using stickers or pinstripes
Translucent allowing models to be creatively lit from within
Takes paint or decals extremely well
More durable than previous Flite Test foam products
**Tech Note: While Maker Foam exhibits water resistant properties, it's not completely waterproof. If you plan to expose the finished plane to water then we highly suggest painting your model to ensure longevity.
Kit Includes:
Laser-cut Foam Airframe
Power Pod (Mini)
Firewall (Mini)
Push Rods
Control Horns
Bar-BQ Skewers
Velcro
Rubber Bands
Specification Sheet
Needed to Complete:
(1) Brushless Motor: Flite Test A Radial or Park 250 2200kV minimum
(1+) Propellers: 6x3
(1) ESC: 12-20 Amp
(1+) Battery: 2S-3S 7.4V-11.1V LiPo 500-800mAh
(2-4) Servos: ~5 Gram Micro Servos
(1) 2.4GHZ Radio System (Radio & Receiver)
6 Channel Radio
Misc. Building Supplies.
