1/10 RR10 4WD RTR Bomber
![]() |
|
|
![]() ![]() |
- 2.2 BFGoodrich® Baja T/A® KR2 tires (S30 compound)
- 2.2 Walker Evans Racing wheels
- King aluminum shock bodies
- AR60 OCP-AXLE™ - solid axles front and rear
- The YETI style transmission with RR10 specific transfer case bolts directly onto the skid plate allowing for proper driveshaft alignment
- Rear output differential cover included (enables the opportunity to build multi-axle vehicles)
- Hi-Lo transmission with all metal internal gears and optional two-speed transmission component sold separately (AX31181)
- Rear sway bar mount connected to the cage for additional rear suspension tuning. Optional sway bar sold separately (AX31331)
- Fully functional spare wheel and tire with a quick release mount
- Realistic full tube frame composite chassis
- 35T brushed motor
- Waterproof AE-5 ESC with male Star Plug battery lead
- Tactic TTX300 3-channel SLT radio
- Tactic TR325 3-channel, 2.4GHz receiver
- Tactic TSX45 metal gear servo, 151 oz-in, water resistant
- Dual slipper clutch
- Waterproof receiver box
Axial R/C Inc. is extremely pleased to partner with Randy Slawson, Bomber Fabrication’s owner and two-time King of the Hammers rock racing champion! For this rig, Axial took everything they learned from building the industry’s first all plastic tube chassis rig and drew upon mountains of inspiration from enthusiasts to go next level! The Axial RR10™ Bomber is not just another plastic tube chassis Wraith update - it merely adds to our line of successful 2.2 rock racing vehicles. While visually this rig is a race replica of the Bomber Fab KOH rock racing rig, one of the unseen features is the front mounted battery tray under the hood making for easy access and weight right where you asked for it! This makes swapping the batteries in this rig a quick and easy process, especially for those enthusiasts participating in the ultra endurance series within Axialfest! The skid plate provides a centralized location for the electronics with clean wire routing and an RR10™ specific transfer case for optimal driveline efficiency. Axial also included a full set of BFGoodrich® BAJA T/A® KR2 tires along with a spare in the back, wrapped around officially licensed Walker Evans Racing wheels. Also included is a variety of shock mounting points for running dual shock setups and more suspension tuning options. For additional rear suspension tuning, you'll find a sway bar mount connected to the cage, under the fuel cell (sway bar sold separately). Officially licensed aluminum King Shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Standard features include durable front and rear WB8 HD Wildboar™ driveshafts, front and rear AR60 axles, a dual slipper clutch, Hi-Lo transmission with all metal internal gears, a 3-channel radio system, realistic scale details including molded driver figures, three pairs of helmets, molded shock reservoirs, a fuel cell, Bomber Fabrication body panels and graphics, and a fully licensed scale tube chassis.
RANDY SLAWSON - BOMBER FABRICATION
At the age of 12, Randy Slawson was first introduced to the off-road lifestyle by his uncle. Trips to the mountains for the sole purpose of exploration and camping became one of his favorite pastimes. As he grew older; and of driving age, his interest in off-road vehicles evolved into a passion. Upon moving from Oregon to Southern California, he discovered the desert and all of its beauty. He naturally migrated toward work in the off-road industry. After working several years for a sand car manufacturer, he became one of the lead instructors at the top metal fabrication school in southern California. His off-road passion took a turn toward the rocks, where he was heavily focused on trying to conquer the rock crawling “Hammer” trails of Johnson Valley. His skill set and equipment had evolved rapidly, so did the weekends’ goals. His target shifted from being able to complete the trails, to seeing how fast he could complete the trails. This evolutionary process armed Randy with all the necessary skills and equipment to compete in the races held in Johnson Valley. Competing on a shoe string budget, he learned to respect the equipment, yet push it to its very limit. In 2010, Randy started Bomber Fabrication; a Southern California based metal fabrication business. His Bomber chassis are heavily respected in the rock racing community due to their simplicity to work on, their striking good looks and undeniable success in the desert. He has been named “King of the Hammers” twice, once in 2013 and again in 2015.
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
This is the Radio Controlled, Electric Powered 1/10 scale Ready to Run Off-Road 4WD RR10 Bomber Rock Racer from Axial Racing. FEATURES: Chassis: Licensed Bomber Fabrication scale tube, high-strength composite plastic Drive: Four wheel shaft Front and Rear Driveshafts: WB8 HD Wildboar, updated design with larger diameter cross pin with a 2mm hex drive for added strength, center splined slider floater tube with added material that reduces flex and fatigue, captured cross pin design offers greater durability and easier maintenance than set screw design AR60 OCP Axle: High-strength composite material, tubes reinforced with boxed-in axle truss, off-center pumpkin, updated steering knuckles for dual shear & elimination of secondary bolt on plate, updated diff cover and servo mount for new look Transmission: RR10 specific all metal internal gears, full ball bearings, single speed w/high gear for higher speed, two-speed component sold separately Slipper Clutch: Dual slipper design, 32P 56T spur gear for high- torque applications Motor Mount: Integrated with transmission, wide range of movement for endless gearing options Motor: Axial AX31312 35 turn brushed Electronic Speed Control: AE-5 3S LiPo compatible, switchable on the track between NiMH and LiPo batteries with a simple jumper-no complex procedures Radio: Tactic 2.4GHz SLT 3-ch TTX300, programmable 3rd channel operates two-speed shifting, winches and lights (not included), TR325 2-ch receiver Steering Servo: Tactic TSX45, metal gear, water resistant, dual ball bearings, 151 oz-in torque Shocks: Clear coated polished aluminum body King shocks, precision machined pistons for smooth performance throughout range of travel, super soft blue springs, optional front & rear secondary shock mounts, dual shear shock mounting locations Suspension: 4-link, rear swaybar mounts for optional rear swaybar (AXIC3331) Wheels: 2.2" Walker Evans Racing, black in color, 12mm hex Tires: BF Goodrich Baja T/A KR2, S30 sport compound Steering: Direct, updated knuckles for dual shear, eliminates secondary bolt-on plate Interior: Polycarbonate tray w/driver figures and dashboard, three pairs of black styrene helmets (motorsport, open skull face & motorcross), scale molded shock reservoirs Battery Tray: Forward mount easy access Warranty: One year bumper to bumper limited. Axial's warranty center Hobby Services will repair or replace any incorrectly made part. Proof of purchase is required for Axial to honor any warranty claim. Axial reserves the right to change or modify this warranty without notice. This warranty does not cover damages due to normal wear and tear, users' failure to perform routine maintenance, user error of assembly or installation, modifications, misuse, crash damage, or the addition of aftermarket parts or optional parts. Note: Purchasing products from unauthorized retailers may void the warranty and prevent support and service. Repair or replacement of the product by Hobby Services is the sole and exclusive remedy for any loss or damages. INCLUDES: RTR Axial RR10 Bomber with Motor, ESC, 3-Channel Radio, Tires, Wheels Interior Detail and Instruction Manual REQUIRES: Battery: 2-3S LiPo Battery Charger: Compatible with selected battery AA Batteries: Four for transmitter Track and maintenance equipment SPECS: Overall Width (Face to Face): 11" (280mm) Length: 22.4: (570mm) Height: 9" (230mm) Wheelbase: 14.75" (375mm) Ground Clearance: 2.8" (72mm) Weight: 6.25lbs (2.83kg) Battery tray: Width: 6" (152mm) Height: 2" (51mm) Length: 1 1/8"-1 5/8" (29mm-42mm) COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 10x15mm Steering Knuckles 1 AXIC0230 2 5x11mm Steering Knuckles 1 AXIC0221 2 5x11mm Fr Dogbones 1 AXIC0221 1 5x11mm Spur Gear 1 AXIC0221 2 5x11mm Fr Driveshaft 1 AXIC0221 2 10x15mm Fr Differential 1 AXIC0230 2 5x11mm Rear Driveshaft 1 AXIC0221 2 5x11mm Rear Diff 1 AXIC0221 10 5x11mm Transmission 5 AXIC0221 jxs 11/09/15 ir/jxs