SCX10 II 1/10 2000 Jeep Cherokee 4WD RTR
click to enlarge
- AR44 universal axle set
- 35t brushed motor, water resistant
- AX10 transmission
- All steel suspension links
- Chassis mounted servo (cms)
- WB8 HD wildboar driveshafts
- 1.9 Bfgoodrich all-terrain t/a ko2 tires - s30
- 1.9 method mesh wheels
- Adjustable battery tray
- Steel c-channel frame rail chassis
- Adjustable wheelbase
- JCR offroad vanguard bumpers and XJ rock sliders
- 2000 jeep cherokee body
- Receiver box, waterproof
- Dual slipper clutch
- Adjustable coilover shocks
- Tactic ttx300 3-channel slt radio
- Tactic 3-channel 2.4ghz receiver
The SCX10 has been the vehicle of choice for scale trail fun! For the past 8 years the SCX10 has been the staple vehicle platform for scale trail enthusiasts around the world. Axial was one of the first companies to embrace R/C rock crawling and the first to mass produce a scale trail truck. Axial has been watching trends, tirelessly testing, and experimenting to create the next evolution of the SCX10. The SCX10 II is the culmination of many years of development, furthering aesthetic realism while maximizing trail performance. The next generation of SCX10 is here! The original AX10 axle was developed in 2007 for Axial’s first kit, the AX90001 Axial AX10 Scorpion RC Comp 10 - 1/10th Scale Rock Crawler - Electric Kit. In 2008, the AX10 axle was used in the SCX10 chassis, which paved the way for the scale trail scene. While developing the next iteration of axles such as the AR60, we started thinking about what kind of axle would be more suited for the future of the SCX10. Our design of a new axle needed to feature three key points. First, we wanted the axle housing to visually quench the thirst of scale enthusiasts. Second, we needed to create a gear set with the technical attributes to overcome the torque twist that is often associated with smaller gear sets. Third, the axle itself needed to be durable. After seven years of utilizing the original AX10 axle and two years of development, Axial is proud to introduce the industry's first high pinion gear set in our newly developed AR44 axle! The next chapter of the Axial SCX10 begins with true technological engineering and scale realism!
AR44 HI-PINION AXLES
In 2008, the AX10 axle was used in the launch of the SCX10 chassis platform. While developing the next iteration of axles such as the AR60, the thought process began on what kind of axle would be best for the future of the SCX10. Axial’s development of a new axle needed to feature three key design points. First, an axle housing to visually quench the thirst of scale enthusiasts. Second, a gear set with the technical attributes to overcome the torque twist often associated with smaller gear sets. Third, the axle itself needed to retain the durability associated with the SCX10, despite being delivered in a smaller axle housing. After seven years of utilizing the original AX10 axle and two years of development, Axial is proud to introduce our newly developed AR44 axle with the industry's first high pinion gear set. The next chapter of the Axial SCX10 begins with scale realism backed with true technological development!
- High pinion gears for added ground clearance & better driveshaft angles
- The high pinion design allows increased gear surface contact for increased durability
- Larger load bearings used around the gear set to reduce flex and create a stronger drivetrain
- Single piece axle housing for added strength
- 1-piece all-metal locker front and rear
- Small pumpkin for increased clearance and a more realistic, scale look
- Bolt on link mounts
- Knuckle carriers and straight axle adapters have a better mounting system with 10-degree increment adjustments
- Optimized gear ratio – 3.75 compared to 2.92 previously. This reduces torque twist which is typically seen with other small pumpkin axle designs
The AR44 axle was designed for both aesthetics and functionality. To improve upon the older AX10 axle, we designed the steering components with an 8 degree kingpin angle which results in a positive scrub radius. Making this change to the pivot point means less tire scrub for steering efficiency and less load on the steering servo.
- 8 degree kingpin angle
- Improved scrub radius over the AX10 axle
AR44 UNIVERSAL AXLE SET Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain.
- Up to 45 degrees of steering
- Smooth action for an efficient drivetrain
- Compact yet durable design
- Hardened steel construction
35T BRUSHED MOTOR, WATER RESISTANT
Providing an even balance of speed and crawling, the 35-turn brushed motor features a worry-free design with an integrated cooling fan allowing for extended periods of use. Easy operation: no tuning, no fuel, and no loud exhaust noise. Just plug 'n' go! AX10
The ultra compact transmission allows for a wide range of gearing choices. The overall ratio can be adjusted using different pinion and spur gear choices allowing super high speed or competition level crawling speed.
- Three gear layout
- Metal motor plate
- 32P gearing
- Heavy duty slipper
- Sealed gear cover
CHASSIS MOUNTED SERVO (CMS)
Scale matters, but so does geometry! In pursuit of scale looks, we’ve moved the servo off the top of the axle and onto the chassis, just as a full size truck has its steering box located on the frame. But with this seemingly simple action comes a complexity of suspension hurdles to overcome - one of which is bump steer. The undesirable steering is caused by bumps interacting with improper length or angle of suspension and steering links. We made it our mission to design the front suspension in such a way that it eliminates or comes as close as possible to zero bump steer, to help give you the best driving experience possible.
- Scale looks with proper suspension geometry
- Anodized aluminum links included w/ M4 rod ends
- Adjustable servo mounting system allows for a wide range of servos to be used
- Properly designed suspension for nearly zero bump steer
WB8 HD WILDBOAR DRIVESHAFTS
WB8 HD Wildboar front and rear driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.
- 3-piece driveshaft with strengthened slider-floater tube
- Increased surface at the connection between the ball joints and output shaft tubes
- 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint
- Captured cross pin design eliminates older set screw design for more durability/easy maintenance
- Adjustable length driveline parts included in box
ADJUSTABLE BATTERY TRAY
The new adjustable battery tray is now relocated lower and further forward for better weight distribution and center of gravity (COG).
- Adjustable tray that prevents the battery from coming loose or shifting while driving
- Posts are included to fine tune the fit based on the battery you choose
- Easy access for quicker battery changes
- Can accommodate batteries up to 32x44x147mm (3S 5,000 mAh)
STEEL C-CHANNEL FRAME RAIL CHASSIS
The realistic high strength c-channel chassis frame is made of durable steel with cross bracing for reinforcement and is held together with all hex hardware. Realistic looking frame and cross braces improve chassis rigidity (torsional stiffness). Realistic shock hoops with multiple shock mounting positions allows you to adjust your suspension for maximum performance. The simplified design makes maintenance and assembly quick and easy. The contoured skid plate significantly reduces hang-ups on terrain. Compared to the previous design, additional holes have been added to the rear portion of the frame rails for making wheelbase adjustments.
This chassis is designed at 12.3” wheelbase length, but is easily adjusted to either a 11.4” or 12.0” wheelbase (optional link kits sold separately). Axial designed the chassis so that all the wheelbase adjustability happens out back without sacrificing front-end suspension geometry. Simple removal and installation of the suspension links and changing the drive shaft length allows an easier way to adjust the wheelbase. • Wheelbase adjustment is easily done in the rear end without affecting the steering geometry and maintaining zero bump steer. • Adjustable wheelbase (11.4”/ 12.0” / 12.3”) with optional links sold separately • 4 link rear • 12.3” wheelbase JCR
OFFROAD VANGUARD BUMPERS AND XJ ROCK SLIDERS
Scale front and rear bumpers and rock sliders licensed by JCR Offroad. • Rear mount has been extended and stiffer plastics chosen to help limit the typical sag seen in plastic bumpers • Lenses included for light locations on bumpers • Rear tow hitch included for added scale appearance • Rock sliders specifically sized to fit the Axial Jeep Cherokee body and the design allows for adjustable widths
2000 JEEP CHEROKEE BODY
Pre-painted body with molded scale detail parts (Grill with clear lenses, mirrors, door handles and liftgate trim panel). Throughout the rich history surrounding the Jeep brand, there have been several influential vehicles hailing from the seven-slot stable, one of which is the Jeep Cherokee (XJ). Possibly considered as the dawn of the modern SUV, the XJ was first presented 1984 as one of the first small SUV’s introduced into the American market, which carried on until 2001. During its 17yr production run, the XJ was built on several continents for world wide exposure, offered in either a 2-door or 4-door configuration, available in several different trim levels along with either a 2wd or 4wd drivetrain. Under the hood featured three different engine options consisting of 2.5L I4 AMC (125hp @ 5400rpm and 150lb/ft of torque @ 3250rpm), 4.0L I6 OHC AMC (193hp@4600rpm and 231lb/ft of torque @ 3000rpm), and a Euro spec only turbo diesel I4 OHV (114hp@3900rpm and 221 lb/ft @ 2000rpm). In '97, the XJ received a facelift that updated design queues focused on aerodynamics, body stiffness, styling as well as the spare tire being relocated from the rear bumper to inside the cab. The stiffer uni-body construction brought forth improvements in noise cancellation and vibrations while aerodynamics improved engine efficiency. From an off-roading perspective, the XJ has proven to be a relatively inexpensive vehicle for purchase thus making it a value based build option, capable of suiting just about any sort of budget. Its bones are strong thanks to a Quadra-Link suspension system and primarily coming with Dana 35 axles since the beginning, but there was a Dana 44 option between '87-'91. Don’t let its smaller size fool you, there’s room for four passengers and space for days, making it a great expedition rig for friends and family to tag along.
RECEIVER BOX, WATERPROOF
Three different silicone seals are included, one for the antenna, one for the servo wires (includes three slots for three channels), and one that acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!
- Waterproof receiver box located on the side plates allows easy access and low center of gravity
Wire routing has been thoroughly thought through to help keep your chassis layout looking clean. In addition to including wire clips/guides, there has been a channel created that runs the length of the chassis so you can run additional wires hidden inside the c-channel frame.
- Optional mounting points and wire routing for a chassis mounted servo winch and 2 speed shift servo
DUAL SLIPPER CLUTCH
Our dual slipper design uses a pad on each side of the spur gear for added surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32 pitch gearing for high torque applications.
- Slipper design uses a pad on each side of the spur gear for added surface contact area
- More precise tuning and holding power
- Strong 32P gear pitch for high torque applications
ADJUSTABLE COILOVER SHOCKS
The threaded shock bodies hold a single coilover spring. They are oil filled and allow you to tune the dampening rate.
- All new shock towers with body mounts built in
- The body mounting system covers a larger range of positions and is a much more solid mount than previous
- No additional spacer needed when mounting shocks
TACTIC TTX300 3-CHANNEL SLT RADIO
Sport-level racers and bashers will appreciate the Tactic TTX300's many popular features, along with its amazing adjustability. It features a programmable 3rd channel making for incredible versatility; it can operate functions such as two-speed shifting, winches and lights, making it ideal for a vast array of opportunities. Need more reasons? There's SLT (Secure Link Technology), which creates an unbreakable link between the receiver and your transmitter with push-button ease.
TACTIC 3-CHANNEL 2.4GHz RECEIVER
The Tactic TR325 2.4GHz receiver uses no crystals and features an internal antenna, so you'll experience worry free driving without frequency conflicts or antenna damage. This lightweight, compact, and bind button equipped receiver with LED indicator makes setup easy!
- Items Required to Complete (5)
- Replacement Parts (104)
- Optional Items (92)
- Upgrade and Hop-up Parts (1)
**Additional Technical Info Will Be Added When It Becomes Available.** This is the Electric Powered, Radio Controlled, 1/10 scale Ready to Run Axial SCX10 II 2000 Jeep Cherokee 4WD from Axial Racing. FEATURES: Chassis: Scale steel C-channel side rails with adjustable body mount, adjustable bumper mounts with swaybar mounting points, mounting points for optional 2-speed and servo winch, adjustable chassis mounted servo system Drive: Full time 4WD locked drivetrain with WB8 HD Wild Boar driveshafts, UVJ style front driveshafts for increased steering angle, full ball bearing drivetrain Transmission: AX10 three gear layout, metal motor plate, adjustable ratio for high speed or competition level crawling speed Slipper Clutch: Dual pad design for added surface area Motor: 35 turn, brush equipped, water resistant, integrated cooling fan Radio: Tactic TTX300 3-channel SLT radio with TR325 Receiver, programmable 3rd channel for operating two speed transmission winches or lights Steering Servo: Tactic TSX45 metal gear, water resistant, 151oz/in torque rating, dual ball bearings ESC: Axial AE-5 waterproof, switchable between LiPo or NiMH operation with a jumper, male star plug lead Spur Gear: 56T 32-pitch Pinion Gear 15T 32-pitch Battery Tray: Easy access front mount, accomodates batteries up to 1.2 x 1.7 x 5.8" (32x44x147mm) 3S, 5000mAh Front and Rear Axles: Hardened steel AR44 Hi-Pinion Axle: Hypoid cut CNC metal gears, optimized gear ratio for reduced torque twist, optional gearing choices, one- piece axle housing, increased clearance, larger load rated bearings for durability, 8° kingpin axle eliminates tire scrub, single piece axle housing, one-piece all metal locker, 10° increment adjustments for knuckle carriers and straight axle adapters, optimized gear ratio; 3.75 compared to 2.92 previously, for less torque twist Body: Painted 2000 Jeep Cherokee Wheels: 1.9" Method, composite plastic construction, black in color Tires: BF Goodrich A/T KO2, S30 compound, 4.65" (118mm) outer diameter, 1.7" (42.5mm) wide Shocks: Coil over, oil filled, steel springs, white in color Suspension: Optimized suspension geometry with integrated mounts upper and lower aluminum links, 4-link design reduces axle steer and torque twist, and guards against suspension wrap-up in high- power applications, all steel links Steering: Proper CMS geometry using 3-link setup with panhard bar, 45° steering angle Bumpers: Scale front and rear bumpers and rock sliders licensed by JCR Offroad, lenses in bumpers for light kit (light kit not included) Warranty: Axial warrants this kit to be free from defects in materials and workmanship when new. This warranty does not cover damages due to normal wear and tear, user's failure to perform routine mantenance, user error of assembly or installation, user modifications, addition of aftermarket parts or option parts. INCLUDES: RTR SCX10 II Jeep 4WD All Terrain, Shocks, Wheels, Tires, Painted Body, Rock Sliders, Radio, ESC, Motor, Decals. Waterproof Receiver Box and Instruction Manual REQUIRES: Battery: 6-cell NiMH or 2-3S LiPo Battery Charger: Compatible with selected battery Building and track equipment SPECS: Vehicle- Length: 22.1" (561.9mm) Width: 8.9" (228mm) Height: 10.5" (268mm) Wheelbase: 12.3" (312.4mm) adjustable with optional link kits sold separately Ground Clearance: 3.0" (77mm) Weight: 4.5lbs (2.04kg) approximately, with electronics Final Drive Ratio (FDR): 40.44, stock (33.69-54.15 with different spur/pinion gear combinations, extra spur and pinion gears must be purchased separately) Body- Length: 20.1" (511mm) Width: 8.3" (211mm) behind front wheels, narrowest point 9.0" (230mm) at rear wheels, widest point Height: 5.4" (137mm) COMMENTS: For Replacement Ball Bearings use: Qty. Size Location Qty. Qty. Stock Number 2 7x14mm Ring Gear 1 AXIC4406 2 5x14mm Pinion gear 1 AXIC4407 2 5x11mm Pinion Gear 1 DTXC1547 2 10x15mm Front Uprights 1 DTXC1595 2 5x11mm Front Uprights 1 DTXC1547 2 5x11mm Rear Axles 1 DTXC1547 2 5x11mm 2-sp Top Shaft 1 DTXC1547 2 5x11mm 2-sp Bottom Shaft 1 DTXC1547 4 5x10mm Transfer Case 1 DTXC1535 jxs 07/13/16 ir/jxs