SHAFT 400 Parkflyer Aerobatic Sport Trainer 39"
|
|
||||
 |
||||
|
||||
|
|
||||
 |
||||
|
||||
|
|
||||
 |
||||
|
||||
|
|
||||
 |
||||
|
||||
|
|
||||
 |
||||
|
||||
|
|
||||
 |
||||
|
||||
 |
|
|
|
 |
More like this... Park Flyer Electric Aircraft Kits
But only from... STEVENS AEROMODEL
All items from... STEVENS AEROMODEL
But only from... STEVENS AEROMODEL
All items from... STEVENS AEROMODEL
StockStock availability for on-line ordering 
StockStock availability for pick up
This live feed
information is to be used as a general guide to current inventory. There is no guarantee of
availability.
SPECIFICATIONS
39 in
Wingspan:
340 sq in
Wing Area:
6.4 oz/ft²
Wing Loading:
35 in
Length:
15 oz
Weight:
200W (A20-20L)
Motor Requirements:
4 or 5 Channel R/E/A/A/T
Radio Requirements:
3 or 4
Servo Requirements:
Castle Phoenix 25
ESC Requirements:
1100 mAh (24C) 11.1V
Battery Requirements:
FEATURES
The SHAFT (Super High Performance Aerobatic Flight Trainer)... fills the void between our basic 4 channel "stik" trainers which are designed for positive stability and our higher performance G series models which are designed for unlimited aerobatics.
Light and efficient airframe... Designing at elevations well over a mile high forces us to create more efficient air vehicles that overcome the atmospheric density challenges of high altitude flight. Through intelligent use of materials and good old fashion engineering we are able to provide a better functioning product.
Simple Construction... Even the novice can build the SHAFT! Featuring a low part count of 100% precision laser cut balsa and hardwood components. Warp resistant wing construction, Carbon fiber capped flying surfaces, Truss Loc(tm) and tab and notch assembly techniques assist you to build a straight and true airframe that stays true.
Under-Carriage designed to stay with the plane upon arrival... Our beefy landing gear derived from the SQuiRT will absorb anything the novice pilot can dish out and won't tear out of the fuselage.
Flies like a bird not a brick... We bet you'll overshoot the runway! the SHAFT's semi-symmetric airfoil and a flying wight over 1/2 pound less than competing models add up to one agile bird that insists on staying aloft.
Minimize Collateral Damage... The SHAFT's wings easily slip from the fuselage and the landing gear flexes and shifts to avoid unnecessary bench time between those exciting arrivals.
Take it on the road with you... The SHAFT packs flat and is itching to go with you on your next road trip.
Kit Includes: Full Size Rolled Plan Sheet Precision Laser cut AAA balsa and hardwood Pre-Bent Landing Gear Full hardware complement - real premium DuBro hardware. You'll need 1-2 rolls of your favorite colored AeroLITE or AeroFILM product. See "Specifications" tab for radio and power system requirements.
Customers who bought this item also bought...
|
|
|
|
|||||||||||||||||||||||||||||||||||||||
SAK-SHAFT400