This live feed
information is to be used as a general guide to current inventory. There is no guarantee of
availability.
FEATURES
The MMP poly mix is an automotive grade additive and an integral part of this system. Like the paint it is very easy to use. After thinning your paint with Mission Models thinner flip the cap on the poly with your thumb turn the bottle completely upside down ( creates a vacuum effect in the bottle) and squeeze out a few drops into the paint and mix. One or two drops is all you need.
For best results Mission Models highly recommends stirring the Poly and Thinner in your mixing cup. DO not shake.
The poly additive is beneficial as it increases durability , sanding properties and further Leveling. Mission Models Poly Mix additive also acts as an additional adhesion promoter. You do not need to use the poly to make the paint work as intended but adding the poly to your reduced paint will give you increased and unbelievable museum quality results. Mission Models Polyurethane will slow the drying time so less is more. If you add too much Poly the paint will dry slower. Don't worry it will dry it will just take longer.
We prefer to add 3 to 5 drops of Poly Intermix ( MMA-001) to the paint when spraying straight from the bottle but drops to be added depends on how much paint you mix. There is no need to add poly to Mission Models primer.
