Home » Product Info »
HPMMBL7002EL

Moblite7 Avatar Mini 1S 75mm HD Whoop ELRS

Product Info
HPMMBL7002EL
Moblite7 Avatar Mini 1S 75mm HD Whoop ELRS
By HAPPY MODEL
$299.99 CAD   
FREE SHIPPING over $99
Details »
Order Quantity:  
Click to Enlarge
click to enlarge

More like this... Multirotor Drone, ARF Racing Drones under 250g AUW
But only from... HAPPY MODEL
All items from... HAPPY MODEL


 Inventory Status Legend
StockStock availability for on-line ordering
4
$299.99
Warehouse ?
StockStock availability for pick up
4
$299.99
Warehouse ?
1
$299.99
Store - Stratford ?
1
$299.99
Store - Edmonton ?
1
$299.99
Store - Mississauga ?
1
$299.99
Store - Ottawa ?
1
$299.99
Store - Oshawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availability.
SPECIFICATIONS
75 mm
Rotor Span:
98 mm
Length:
98 mm
Width:
48 mm
Height:
33.5 g
Weight:
RS1002-20000kV
Motor (included):
ExpressLRS SPI
Receiver (included):
1635-3 tri-blade
Propeller:
Walksnail Avatar Mini 1S
Video System:
GNB27
Battery Plug:
SuperbeeF4 Lite ELRS
Flight Controller:

FEATURES

Moblite7 Avatar HD Whoop brings HD video capability to the world of Whoop racing. Equipped with the Avatar HD Mini 1S video system, and powerful RS1002-2000kV motors the Moblite7 offers performance and spectacular views not seen before in the world of Whoops.

 

Flight controller

SuperbeeF4 Lite ELRS/FRSKY
SPI ELRS version Firmware target: CrazybeeF4SX1280SPI
FRSKY version Firmware target: CrazybeeF4FR
MCU:STM32F411CEU6 (100MHz, 512K FLASH)
Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)
Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot300 ready
Built-in Betaflight OSD(SPI Control)
Built-in SPI Frsky/ExpressLRS receiver
Built-in 5V 1A BEC
Built-in voltage detection


Onboard 4in1 ESC

MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV (2.8v~4.35v)
Currents: 5A continuous peak 6A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT150/DSHOT300/DSHOT600


Onboard SPI ExpressLRS 2.4GHz Receiver

Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHz
Telemetry output Power: <12dBmReceiver protocol: SPI ExpressLRS
Could bind with ELRS V2.0 firmware TX module
Also support ELRS V3.0 , need upgrade betaflight firmware
 


Motors

Model: RS1002 20000KV
Configu-ration:9N12P
Stator Diameter:10mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*12.5mm
Weight(g):2.5g
No.of Cells(Lipo):1S only


Propellers

Gemfan 1635-3 Bi-blades Props Dia:40mm
Shaft size:1.5mm
Include 4pcs a pack


VTX

Model: Avatar mini 1s module
Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP):     FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm;
MIC: <25dBm
I/O Interface: JST1.0*6(Power in)JST0.8*4(USB)
Mounting Holes: 25.5*25.5mm
Dimensions: 30*30*6.5mm
Storage: 8G
Recording: 1080p/720p
Weight: 5.1g
Operating Temperature: -20-40?
Channels: 8
Wide Power Input: 3.1V-5V
Supported FC System: Betaflight
OSD: Canvas mode
Bitrate: 25mbps 50mbps
Latency: Average delay 22ms
Antenna: IPEX


Camera

Model: Avatar Nano
lmage Sensor: 1/2.7”Inch
Resolution: 1080P/6Ofps,720P/120fps,72OP/6Ofps
Ratio: 16/9 4/3
Lens: 2.1mm
FOV 170°
Aperture: F2.0
Shutter: Rolling shutter
Min.Illumination: 0.001Lux
Weight: 3.5g
Dimensions: 14*14*17mm
Coaxial Cable: 45mm

click image to enlarge
ADDITIONAL PHOTOS
 
Customers who bought this item also bought...
Meteor75 Pro HD Brushless 1S Whoop Walksnail Avata... 
$329.99
  
5A10058  
5A10058