This is a factory painted and ready-to-run R/C model of the Honda City Turbo. The super detailed ABS plastic body is mated to the fun to drive and easy to maintain WR-02C chassis. It features 2WD with fully-independent, double-wishbone suspension. The pre-installed 2-channel radio system operates on 2.4GHz technology, which allows you to run your vehicle anywhere without the need to worry about other R/C enthusiasts nearby.
This is the Electric Powered, Radio Controlled, 1/10 scale Ready to Run Tamiya XB Honda City Turbo Car On-Road Car. FEATURES: Chassis: WR-02C plastic monocoque with wheelie bar Drive: Rear wheel Motor: 540 size brushed, mounted to preassembled and sealed bearbox Electronic Speed Control: TEU-105BK Radio: 2.4GHz pistol grip Body: ABS plastic white in color, style is from 1983, helmeted driver figure Shocks: Friction, not oil-filled Differential: Gear type Suspension: Four wheel independent double wishbone Front Bumper: Spring loaded, located under body Tires: Treaded rubber, diameter 2.7" (69mm), rear width 1.6" (40mm), front width 1.2" (32mm) Wheels: White plastic Steering: Bell-crank Camber Tie Rods: Fixed non-adjustable Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis INCLUDES: RTR Honda City Turbo Car On-Road Car with ESC, Tires, Wheels, Motor, Body, 20T Pinion Gear, Decals and Instruction Manual REQUIRES: Battery: 7.2V NiMH 6-cell stick pack with standard connector Battery Charger: Compatible with selected battery AA Batteries: For transmitter SPECS: Vehicle; Wheelbase: 7.3" (185mm) Body; Length: 12.5" (318mm) Width: 7.9" (200mm) Height: 5.1" (131mm) COMMENTS: To upgrade to ball bearings order; Qty. Size Location Qty Bearing Set 2 5x10mm Rear Uprights 1 DTXC1535 4 5x11mm Front Uprights 2 DTXC1547 7 5x11mm Diff Gears 4 DTXC1547 jxs 05/18/16