Pacemaker 100 Nostalgic RC Old Timer
|
click to enlarge
|
More like this... Park Flyer Electric Aircraft Kits
But only from... STEVENS AEROMODEL
All items from... STEVENS AEROMODEL
But only from... STEVENS AEROMODEL
All items from... STEVENS AEROMODEL
This live feed
information is to be used as a general guide to current inventory. There is no guarantee of
availability.
SPECIFICATIONS
27.25 in
Wingspan:
100 sq in
Wing Area:
2 oz
Weight:
3 or more Channels
Radio Requirements:
FEATURES
- Hand selected AAA balsa
- Precision laser-cut parts
- Hardware; push-rods, control horns, landing gear wire, and wheels
- Full size detail sheet including trim templates to complete the model as pictured.
Recommended building supplies:
- Thin and Medium CA Glue
- #11 Razor Blades and Hobby Knife
- Sanding Block with 220 and 400 grit paper
- Hook and loop tape for battery mounting (PKZ1039)
- 2 AeroLITE PatchPak (Base Color) 1 AeroTRIM (Trim Color)
- Optional pre-cut vinyl graphics are available to complete this model as pictured
Designed for the following electronics:
- ParkZone PKZ3352 Ultra-Micro Receiver/ESC/Servo “Brick”
- ParkZone PKZ3624 Motor and Gearbox
- Battery 160mAh 3.7V LiPo with UM compatible connector
- E-Flite EFL9051 Propeller
click image to enlarge
ADDITIONAL PHOTOSSAK-PMKR100