This live feed information is to be used as a general guide to current inventory. There is no guarantee of availablility.
67 sq in
2.7 oz/sq ft
4 or more Channels
Credited as the father of the modern home built movement. Ed Heath's parasol was one of the only factory supplied kits in the early 30's that an aviation enthusiast could build at home and receive certification by the FAA.
Plans for the original parasol were published in the "Flying and Glider" manual and in Modern Mechanix magazine. Heath sold an order of 1000 kits with several hundred completed during the great depression.
The LNB-4 features a parasol wing and generous empennage making it a logical choice to model for RC flight. Builders of this laser cut model of the LNB-4 will be rewarded with a stable model featuring classic 1930's lines.
Precision laser cut parts
Full size plan set
Photo illustrated step-by-step assembly instructions
Hardware package including push-rods, control horns, struts, wheels and pre-cut acetate wind screen.
Kit Requires: 1/2 oz. Thin and Medium CA glues
Sanding Block with 220 grit paper
AeroLITE covering film (Silver and Dark Blue - Two Patch Packs Suggested)
ParkZone PKZ3351 or PKZUA1151 Receiver/ESC/Servo unit
ParkZone PKZ3624 Motor
130mm x 70mm Propeller EFL9051 or PKZ3601
DSM2 Compatible Spektrum, ParkZone, or E-Flite Radio