G-300 G-Ride Unlimited Parkflyer Pattern 37" S4

A thoroughbred RC aerobat, this laser cut model airplane kit features graceful lines of past and present IAC aerobats and is firmly rooted in unlimited aerobatics. Developed to offer an elegant mix of precision and freestyle flying, the G-Ride by Stevens AeroModel balances refined IMAC pattern flying without sacrificing freestyle agility. Capable of flying the entire IMAC basic sequence on a brushed GWS EPS-350 and 7.4V LiPo - you will enjoy strong vertical up-lines, large round loops, robust cubans, flawless outside performance, clean snaps and spins, and yes even knife edge slips the length of the field... (just to name a few). Absolutely obscene vertical performance is achieved with the addition of a 200W Hacker A20-20L and 11.1 LiPo.

 

The next best thing to flying a G-Ride is building a G-Ride. The G-Ride utilizes a hybrid truss/box construction using our Truss-Loc(tm) method. This simple build frames in a matter of evenings (usually two before the final sand). No building skills? Relax this project is easily tackled by a first time builder. You will delight in the thorough instructions and goof proof interlocking construction. If you are a purist scratch builder this kit may change your religion!

 

Kit includes: Precision laser cut parts, rolled computer drawn plan sheet, photo illustrated instruction manual, molded plastic cowl and canopy.

 

Suggested Radio Gear: 4 sub-micro servos (HS-55), 4-6ch receiver, servo Y harness.

 

Suggested Building Supplies: Thin CA glue, glue tips, balsa wood filler, sanding block, hobby knife, 1-2 rolls of AeroFILM or AeroFILM LITE covering material.