Twinstar II Electric Kit
click to enlarge
$134.99Store - Charlottetown ?
$134.99Store - Edmonton ?
$134.99Store - Mississauga ?
$134.99Store - Ottawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availablility.
4-channel 4-micro servoRadio Requirements:
- Includes Permax 400 motors with propellers
- Eleapor® foam construction
This is the radio controlled, electric powered, almost ready to fly Multiplex Twin Star II Airplane. For Intermediate Modeler/Fliers. FEATURES: Construction: Elapor foam Wings: Two-piece foam with GRP tubular wing joiner Radio Compartment: Easily accessible under wing Motors: Two Multiplex Permax 6 volt 400 size with connector board and cables Landing Gear: None, model is intended for hand launches and belly landings Aileron Control: Dual Servo Hardware: Control horns, rods and all mounting hardware included Motor Mount: Wing mounted plastic motor brackets INCLUDES: Elapor foam fuselage and wing halves, pushrods, two 400 size motors with connector board and cables, two propellers and spinners hardware package, tail section, decals, photo-illustrated instructions REQUIRES: Speed Control: Electronic Battery: 7 or 8-cell flat Charger: Timed or peak Radio: 4-Channel Servos: Four micro (2-ailerons, 1-elevator, 1-rudder) Two Servo Extensions 12" (305mm): For aileron servos Y-Harness: For aileron servos Building and Field Equipment: Medium CA glue, activator, tools SPECS: Wingspan: 56" (1420mm) Wing Area: 665 sq in (43 sq dm) Weight: 53 oz (1500g) Wing Loading: 11.5 oz/sq ft (35 g/sq dm) Length: 43" (1085mm) Airfoil: Semi-symmetrical, high wing Center of Gravity: 3.3" (85mm) from the wing's leading edge at the fuselage sides. Control Throws- Ailerons: Up +0.71" (+18mm) & Down -0.39" (-10mm) Elevator: Up +0.94" (+24mm) & Down -0.59" (-15mm) Rudder: Right & Left 0.79" (20mm) each side COMMENTS: For Brushless Motor Upgrade Pack, order MPUG3210. This model is NOT made of styrofoam and it is not possible to glue the material using white or epoxy glue. Medium CA glue used with an activator is the only method of gluing recommended by the manufacturer. jxs 9/15/05 ir/jxs