Home » Product Info »
MOU00100

DHC-2 Beaver 20cc Kit Elec/Gas

Product Info | Required Items
MOU00100
DHC-2 Beaver 20cc Kit Elec/Gas
By MOUSTACHE MODEL WORKS
$479.99 CAD    
Order Quantity:  
Click to Enlarge
click to enlarge

More like this... Scale R/C Aircraft Giant Scale Kits
But only from... MOUSTACHE MODEL WORKS
All items from... MOUSTACHE MODEL WORKS


 Inventory Status Legend
StockStock availability for on-line ordering
1
$479.99
Warehouse ?
StockStock availability for pick up
1
$479.99
Warehouse ?
0
$479.99
Store - Charlottetown ?
1
$479.99
Store - Edmonton ?
1
$479.99
Store - Mississauga ?
1
$479.99
Store - Ottawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availablility.
SPECIFICATIONS
91.4 in
Wingspan:
904 sq in
Wing Area:
57.6 in
Length:
12-13 lbs
Weight:
20 cc
Gasoline Engine Requirements:
Power 60
Brushless Motor Requirements:
90A
ESC Requirements:
6S 5000mAh
Electric Flight Battery Requirement:

FEATURES

Moustache Model Works first kit is a 1/6.3 scale DHC-2 Beaver, designed to use a DLE-20 engine or an E-flite Power 60 electric motor with a 6S, 5000mAh Li-Po battery. Drawn from factory blueprints, it features a 100% scale outline.

Wings and tail surfaces are traditional balsa construction, and the fuselage is primarily lite-ply. Tab-and-slot construction ensures straightness of the fuselage. Laser-cutting is used extensively to ensure parts accuracy. The kit comes complete with all required wood, fiberglass parts, vacuum-formed plastic parts, landing gear, carbon fiber wing tube, pushrods, hardware, plans, and detailed instruction manual. Depending upon building speed, construction should take approximately 100 to 150 hours.

The cowl, wing tips, and landing gear fairings are fiberglass, while the windshield, windows, tail fairings, seats, upper carb intake and oil cooler are all vacuum-formed plastic. Two-piece, plug-in wings make transport and storage convenient, and the entire windshield removes as a large front access hatch to make battery or fuel tank access a breeze.

Two options are provided to allow modelers to customize their kits. First, a fiberglass lower carb intake or "chin scoop" is included, allowing the modeler to choose between upper or lower intakes depending upon the specific Beaver he wants to model. Second, three options are provided for the rear side windows: a single round window, a single rectangular window, or dual rectangular windows.

Recommended Completion Items:

Electric Power System

  • E-flite Power 60, 400Kv (EFLM4060A) or equivalent
  • 60A+ ESC, Castle Creations Talon 90 recommended (CSE010009700)
  • 5000mAh 6S 22.2V 30C LiPo Battery 16 x 8E Propeller (suggest APC16080
  • E-Spinner

Gas (Petrol) Power System

  • DLE-20, DLE-20RA or equivalent
  • Fuel Tank, Propeller Ignition battery and switch, OR iBEC

Radio Equipment

  • 2 x Standard size servos, 75+ oz-in torque
  • 4-5 Mini servos, 60+ oz-in torque
  • 6-Channel computer transmitter & Receiver Minimum. flap-elev mixing, aileron-rudder mixing, and differential aileron throw strongly recommended

 

*Although mini servos are recommended for the flaps, ailerons, and throttle, standard servos may be used.

 See instruction manual for a more complete list of items required for construction and completion.

*Please note, this model is a highly engineered, laser cut, kit built model.  -This is NOT an ARF-  Pictures of the completed prototype models are for reference only and meant to show the beautiful and unique model that can be created from this kit.  It's up to the builder to make the model their very own, happy building!

 







click image to enlarge
ADDITIONAL PHOTOS
PRODUCT RESOURCES