Holiday Hours »Holiday Hours In Effect March 29th & 31st

Home » Product Info »
JRPS8717HV

Servo - Ultra Speed Digital HV Alum Case

Product Info
JR PROPO

JRPS8717HV
Servo - Ultra Speed Digital HV Alum Case
By JR PROPO
FREE SHIPPING over $99
Details »
Discontinued
Click to Enlarge
click to enlarge

More like this... Servos Digital
But only from... JR PROPO
All items from... JR PROPO


 Inventory Status Legend
StockStock availability for on-line ordering
0
$269.99
Warehouse ?
StockStock availability for pick up
0
$269.99
Warehouse ?
0
$269.99
Store - Stratford ?
0
$269.99
Store - Edmonton ?
0
$269.99
Store - Mississauga ?
0
$269.99
Store - Ottawa ?
0
$269.99
Store - Oshawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availability.
SPECIFICATIONS
21 mm
Width:
38 mm
Height:
73.7 g
Weight:
230 oz-in
Torque @ 7.4V:
0.06 sec/60°
Speed @ 7.4V:

FEATURES
  • Rugged new aluminum case
  • JR® SuperSteelâ„¢ gears for high precision, and durability.
  • Exclusive motor designed for high voltage applications
  • Outstanding precision combined with outlandish performance

 With its new aluminum case, SuperSteel™ gears, a high voltage motor and improved electronics, the 8717 takes helicopter servos to a whole new galaxy of performance.

Plus it maintains JR's legendary reliability and unmatched, true zero-deadband precision.

Battery chemistries such as LiPo, LiIon, and LiFe have become very popular within the RC community. They are the standard for powering electric motors and have also gained popularity as receiver battery packs. The issue is the output voltage of these batteries is higher then the previous standard 4 - and 5-cell NiCd and NiMH packs, 4.8V and 6V respectively. The higher voltage is not an issue with the receivers but can be for the servos. Many servos will not operate at these higher voltages for very long before burning out the motors or electronics.

To get around this issue modelers have had to use a regulator to drop the voltage to an acceptable operating range for their servos, usually around 5 to 6 volts. The addition of a regulator adds a component that, should it fail, can cause the loss of a model.

JR’s HV servos are designed with motors and electronics that operate off the direct voltage of a 2-cell LiPo, LiIon, or LiFe receiver battery pack (6.6V to 7.4V nominal voltage). This eliminates the need for a regulator and lowers the chance for a power failure that can cause a catastrophic failure of your model. Also note that the HV servo specs are shown at the higher voltage (7.4V 2S LiPo) but will still operate on a standard 5-cell 6V NiCd, Ni MH battery with a reduction in performance of approximately 10% in speed and torque.

 

4944013454862 4944013454862 
JRPS8717HV