SafeCharge Li-Po Battery Charge Bag 3S 3200mAh

         This is the SafeCharge LiPo Charge Safety Bag from ElectriFly.        
                                                                               
FEATURES: Constructed of super-strong fiberglass coated with heat-resistant    
            silicone                                                           
          Seams are joined with heat resistant thread and flap has three melt- 
            proof steel snap closures                                          
          Perfect for 1-3 cell LiPo packs with capacities as high as 3200mAh   
                                                                               
INCLUDES: ElectriFly SafeCharge LiPo Charge Safety Bag with Instruction Sheet  
                                                                               
REQUIRES: Placing battery to be charged toward bottom of bag and snapping flap 
            closed                                                             
                                                                               
SPECS:    Size: 9 x 12.5" (229 x 317mm)                                        
                                                                               
COMMENTS: Charge batteries in a safe area away from flammable materials and    
            only on a non-flammable surface in a vented area. Do not discharge 
            batteries below 3V per cell. Doing so may result in cell damage and
            subsequent cell venting on future charging                         
          The protection provided by this charge safety bag is limited. Do not 
            assume this bag will provide complete protection for all           
            surroundings if a LiPo battery catches fire while inside. Read the 
            included instructions entirely before use.                         
          Do not recharge damaged batteries. Dispose of damaged batteries in   
            the proper manner.                                                 
          It is modeler's sole responsibility to assure their charger is       
            working correctly. Always monitor charging process. Failure to do  
            so may result in cell damage or fire.                              
          In the event of a crash, remove battery from model for observation   
            and place in a safe open area away from flammable materials.       
                                                                               
                                                                   jxs 04/29/10
                                                                         ir/jxs