SU-31 E-Performance ARF 41"
$123.99Store - Charlottetown ?
$123.99Store - Edmonton ?
$123.99Store - Mississauga ?
$123.99Store - Ottawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availablility.
Best selling related parts, options and upgrades...
343 sq inWing Area:
11.5-13 oz/ft²Wing Loading:
4-micro servosServo Requirements:
1250kV BrushlessMotor Requirments:
35A BrushlessESC Requirements:
1250 - 1500mAh 11.1V Li-PoBattery Requirements:
- Balsa and ply construction
- Pre-hinged ailerons and rudder
- Two-piece wings with carbon fiber joiner
- Built-up plywood motor mount
- Pre-covered with Top-Flite MonoKote
- Dual servo aileron control
- Pre-painted fiberglass cowl with magnetic fasteners
- Pre-pained ABS wheel pants
click image to enlargeADDITIONAL PHOTOS
This is the electric powered, radio controlled, almost ready to fly ElectriFly SU-31 3D Aerobatic Airplane. Park Pilot Program Legal Aircraft This SU-31 3D is part of the ElectriFly E-Performance Series. For intermediate to experienced flyers 14 years of age and older. FEATURES: Construction: Balsa and ply with prehinged ailerons and rudder and airfoiled control surfaces, motor box preinstalled with blind nuts providing perfect spacing for spinner backplate-no need for measuring, cowl ring also preinstalled Wings: Two piece with carbon fiber wing joiner, secures to fuselage with wing hooks and rubber bands inside fuselage Motor Mount: Built-up plywood Covering: Top Flite MonoKote Aileron Control: Dual servo Cowl: Prepainted fiberglass, attaches with rare earth magnets Canopy: Clear, single Wheel Pants: Prepainted ABS Landing Gear: Prepainted aluminum 0.079" (2mm) thick Wheels: Two foam 1.75" (44mm) diameter Spinner: White plastic, 1.75" (44mm) diameter Hardware: Full set included Building Time: Approximately 4-6 hours Warranty: Great Planes Model Manufacturing Company guarantees this kit to be free from defects in both materials and workmanship at date of purchase. INCLUDES: ElectriFly ARF SU-31 3D Aerobatic Airplane with fiberglass cowl, ABS wheel pants, landing gear, wheels, hardware, photo-illustrated instruction manual and two decal sheets REQUIRES: Radio: 4 channel computer radio recommended Servos: 4-micro Dual Servo Extension: For aileron servos 6" (150mm) Slim Extension Wire: Two 12" (305mm) Servo Extension: Two Motor: Rimfire 35-30-1250 outrunner 35A ESC for Brushless Motors Battery: LiPo 1250 - 1500mAh 11.1V Cell Balancer: For LiPo battery, Battery Charger: LiPo compatible Propeller: 10x7E SPECS: Wingspan: 41" (1040mm) Wing Area: 343 sq in (22.1 sq dm) Weight: 27.5 - 31 oz (780 - 880g) Airfoil: Fully symmetrical, mid wing placement Wing Loading: 11.5 - 13 oz/sq ft (35 - 40 g/sq dm) Length: 38" (965mm) Center of Gravity: 2-5/8" (67mm) back from the leading edge of the wing at the fuselage side Control Throws- Low Rate High Rate 3D Elevator: 3/8" (9.5mm) 7° 1/2" (12.7mm) 10° 2-1/4" (57mm) 48° Rudder: 1-1/4" (32mm) 16° 2" (51mm) 26° 3-1/4" (83mm) 45° Ailerons: 1/2" (12.7mm) 11° 3/4" (19.1mm) 14° 1-5/8" (41mm) 32° COMMENTS: Pilot figure shown in photos not included. Following are the Top Flite MonoKote colors used on this model and order numbers for six foot rolls; White TOPQ0204 Black TOPQ0208 Sapphire Blue TOPQ0226 Dove Gray TOPQ0211 Yellow TOPQ0203 jxs 12/16/08 ir/jxs