Air 10ch 2.4GHz w/R6014HS

10-Channel 2.4GHz Computer System

Converting a signal from analog to digital form requires processing time — what you experience as lag. The 10C, on the other hand, was designed with a totally digital data stream. The signal starts digital and stays digital. Since no additional processing is needed, there’s no lag, either — just virtually instantaneous, real-time response.

10C System Overview:

• Big, 160 x 72 LCD with backlighting, adjustable contrast & auto-off
• Dial ‘n Keyâ„¢ programming w/joystick navigation
• 15-Model memory (expandable w/optional CamPACs)
• 10-character user name
• 10-character model name
• 2048 resolution in FASST 10-channel mode
• Basic & Advanced menus
• Enhanced airplane, heli & glider software
• Smart Switch Technologyâ„¢ (SST) — Logic Switches allow you to activate a function when specified switch and/or stick positions occur
• Up/down on/off timer (activate by stick or switch)
• Tracks service hours for radio and models
• Mode 1-4 selectable (Modes 3 & 4 programmable)
• Assignable functions/switches
• Auxiliary channel screen — for 1-step function/switch assignment & eliminating unused auxiliary functions
• 2 proportional slider switches
• Digital trims on all 4 main channels
• Trim memory & sub-trims (all channels)
• Adjustable trim steps (1-40)
• Fail-safe, servo reversing & EPA
• “Full Functionality” trainer system (cord required)
• Flap switch (3-position)
• Retract switch
• Rotary Dial (3)
• Adjustable Throttle Cut/Idle Down
• Sticks w/length & tension adjustments
• Servo cycle w/bar graph displays
• Constant trim, voltage, name and timer display

10C Specifics: Advanced Airplane Menu

• 8 Programmable Mixes (4 linear/ (4) w/5-point curves)
  
• 9 Factory-Defined Mixes: Elevator-Flap; Ailvator (for dual elevator servos); Throttle-Needle; Aileron Differential; Flaperon; V-Tail; Elevon; Snap Roll; and Air Brake w/elevator delay
• Dual/Triple rates (4 ch.)
• Exponential (4 ch.)
• Idle down
• Throttle cut
• Throttle delay
• Throttle Hold & Idle-up w/delay
  Plus
  
• 2 independent gyro settings
• 7-point throttle curve
• Flap trim

Advanced Heli Menu

The 10C accepts separate gyro sensitivity, governor speed and servo travel rates for up to 4 flight modes — and automatically changes all three when the flight mode changes.

• 6 Programmable Mixes (4 linear/ (2) 5-point curves)
  
• 8 Factory-Defined Mixes: Hover-Throttle; Hover-Pitch; Throttle-Needle; Governor; Offset; Revo (5-pt.); Delay; and Throttle Mix (ail/ele/rdr)
  
• Gyro menu
  Plus
• 8 swash plate types w/graphics
• Swash Plate AFR
• (4) 7-point throttle curves and (5) (including throttle hold) 7-point pitch curves
  
• Adjustable High/Low pitch setting
  
• 3 Adjustable Idle-up conditions

Advanced Glider Menu

• 8 Programmable Mixes (4 linear/ (4) 5-point curves)
  
• 12 Factory-Defined Mixes: Butterfly-Elevator (2); Elevator-Flap; Chamber Mix (w/ail/ele/rdr adj.); Aileron-Flap; Aileron-Rudder; Flaperon; V-Tail; Flap Trim; Butterfly w/spoiler adj; and 4-point Offset (w/camber adj. for basic/launch/thermal/speed)
  Plus
• Adjustable spoiler
  
• Adjustable Throttle Cut
  
• Single/Dual Aileron and Flap Servo Selections
  
• Start, Speed, Distance & Landing conditions, Adjustable Airbrake Activation
  
• Adjustable Motor Cut

• (2) Slider Switches
  
• (3) Rotary Dials
• More Programmable Mixes
• More Factory-Defined Mixes
• R6014FS Receiver

• 10C Video (WMV, 9.5 M)