Home » Product Info »

DLE-20cc Gas Engine w/Ign/Muf

Product Info | Optional Items

DLE-20cc Gas Engine w/Ign/Muf
$339.99 CAD    357.99
Save $18.00 (5%)

Order Quantity:  
No Picture Available

More like this... Gas Aircraft Motors
But only from... DL ENGINES
All items from... DL ENGINES

 Inventory Status Legend
StockStock availability for on-line ordering
Warehouse ?
StockStock availability for pick up
Warehouse ?
Store - Charlottetown ?
Store - Edmonton ?
Store - Mississauga ?
Store - Ottawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availablility.
Best selling related parts, options and upgrades...
Wrap Around Pits Muffler DL20 
1600-8500 RPM
RPM Range:
29.7 oz
16x8, 18x6
Prop Range:

  • Dual bearing crankshaft support
  • Alloy crankcase
  • Automatic electronic ignition

click image to enlarge
    This is the DLE 20cc Gasoline Powered Engine with Electronic Ignition      

FEATURES: Two sealed bearings on crankshaft-simple design for lighter weight
Beam mounting allows easy fit in the same mount as comparable glow
Aluminum alloy crankcase with advanced CNC machining
Rear mounted pumper carburetor ensures easier installation and smooth
idling and dependable fuel flow during flights
Fully automatic electronic ignition
Two year limited warranty through Hobby Services beginning at date
of purchase

INCLUDES: Engine, spark plug, ignition, muffler, muffler gasket, two 5x20mm
muffler bolts and instruction manual

REQUIRES: Gasoline with at least 87 octane rating
2-cycle oil, mix ratio for this engine is 30 parts gas to one part
oil and must be followed exactly for warranty consideration
and optimum performance
4.8 - 6V NiMH/NiCd, or 6.6V LiFe or 7.4V LiPo battery for ignition
(separate receiver style pack can be used)

**NOTE, If ignition module is the A-02 model it has a built-in
voltage regulator. Model A-02 designation is located above the
word "Ignition" on top of the case**

LiPo & LiFe batteries require voltage regulator on older A-01
ignition module
Propeller and field equipment

SPECS: Output Power: 2.5 HP at 9,000 RPM
Idle Speed: 1,750 RPM
Static Thrust: 6 kg Pulling Force/100 meters altitude
5.3 kg Pulling Force/1,800 meters altitude
Displacement: 1.22cu in (20cc)
Bore and Stroke: 1.3 x 1.0" (32 x 25mm)
Compression Ratio: 10.5:1
Weight: Engine: 22.93oz.(650g)
Exhaust: 1.76oz (50g)
Ignition: 4.23oz (120g)
Total: 28.9oz (820g)
Gasoline/Oil Mixture: 30:1
Gasoline Octane Rating: 87-93
Recommended Propellers: 14x10, 15x8, 16x6, 16x8, 17x6, 18x6
(break-in prop not specified)
Ignition Battery: 4.8V min,max as marked on electronic ignition unit.
If marked 6V max, BEC required if LiPo battery used.
Newer ones may be marked 4.8V to 8.4V.
Replacement Spark Plug: CM3, DLEG2126
Spark Plug Gap: 0.018 - 0.020"
Plug Installation Torque: 7 - 8ft-lbs
Carburetor Adjustments;
Low Speed Needle: 1.5 turns out as a starting point, adjust for a
smooth idle and a reliable transition to high throttle
High Speed Needle: 1.5-2 turns out from closed, adjust needle to peak
RPM, if engine slows or dies at full throttle, the high-speed
mixture is likely too lean
Height from bottom/Crankcase to top of Cylinder Head: 5.4" (138mm)
Height/bottom/of Mounting Tab to top of Cylinder Head: 3.4" (87.5mm)
Width of Cylinder Head: 2.5" (65mm)
Width at Mounting Tabs: 2.8" (70.5mm)
Distance/Mounting Hole Centers Same Side: 1.0" (26mm)
Distance/Mounting Hole Centers Opposite Side: 2.4" (60mm)
Height of Exhaust Opening: 0.42" (10.8mm)
Width of Exhaust Opening: 0.83" (21mm)
Length from Carburetor to Front Bearing: 4.5" (114mm)
Length from Carburetor to Prop Hub: 5.1" (130mm)
Total Height of Muffler including Exhaust Pipe: 3.8" (96mm)
Center of Muffler Exhaust Opening to end of Pipe: 2.4" (61mm)
Muffler Width: 2" (52.1mm)
Exhaust Pipe Inner Diameter: 0.56" (14.2mm)
Crankshaft thread size: 8mm x 1mm

COMMENTS: To avoid permanent damage to the electronic ignition system, NEVER
turn your DLE engine over with the system switched on and the plug
not installed.

jxs 08/26/10
Customers who bought this item also bought...
Gas Conversion Stopper 
Adjustable Motor Mount 1.20 - 1.80 
Standard HD Karbonite 0.15/51oz 
Gasoline Tank Conversion Kit 
Adjustable Motor Mount .60 - 1.20 
Tygon Tubing 3' 1/8" ID 
Kwik Fill Fueling Valve - Gas 
Insta-Cure+ Gap Filling Cyanoacrylate 2oz 
667300800206 0667300800206