Home » Product Info »
AKA13002VPD

1/10 Enduro SC Super Soft Pre-Mounted SC10 Fr

Product Info
AKA RACING

AKA13002VPD
1/10 Enduro SC Super Soft Pre-Mounted SC10 Fr
By AKA RACING
Discontinued
Click to Enlarge
click to enlarge

More like this... Car & Truck Accessories, Wheels
But only from... AKA RACING


 Inventory Status Legend
Stock availability for on-line ordering
0
$25.49
Warehouse ?
Stock availability for pick up
0
$25.49
Warehouse ?
0
$25.49
Store - Charlottetown ?
0
$25.49
Store - Edmonton ?
0
$25.49
Store - Mississauga ?
0
$25.49
Store - Ottawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availablility.
FEATURES

The ENDURO SC tread pattern is an all-around good tire for just about any surface condition. It's our best selling SC tire. The ENDURO features a larger cross cut lugs which offers long tread life yet allows the lugs to fold over and bite into the harshest conditions. All AKA SC tires feature the industry standard 2.2à/3à bead sizes. Mark and Gil have designed an innovative inner carcass design made to perfectly fit the industry standard AKA 1:8 buggy closed cell foams. This results in a much more controlled outer sidewall for more consistent handling and tread wear. No more cranking in tons of camber to keep the tire patch flat on the ground.

Included: Two pre-mounted tires with AKA closed cell inserts on Cyclone wheels.

Tread Performance - Each tire tread is computer designed and track tested by AKA engineers Gil Losi, Mark Pavidis and team drivers to ensure the best performance before each tire goes into production.

Lifespan: The long life of the AKA tires is due to the collective decades of rubber compound development Gil Losi brings to the table. In fact, Mark and Gil have been responsible for developing some of the most successful tires in off-road racing for a generation. Each compound is tested in labs then rigorously track tested to ensure the highest quality.

Balance: Like AKA inserts and wheels, tire balance is critical to superior performance and it''s a priority in AKA tires. Mold components are manufactured to the highest tolerances to ensure the best possible alignment of all the mold components. This results in a tire with more uniform thickness for the best possible balance.

Mold Accuracy: AKA tire molds are made in the U.S.A. using the most advance mold-making techniques and processes available. The cost is higher to produce such a precision mold, but its part of an uncompromising desire to deliver the highest quality product available.

Assembly Quality: AKA Pre-Mounts are all hand assembled using AKA Premium tire glue and are double checked for adhesion quality. There is no doubt AKA produce one of the best pre-mounts in the industry.

8132620112459 8132620112459