Home » Product Info »
AGNH80B036XX

G800F Aerial Gimbal System Combo

Product Info
ALIGN

AGNH80B036XX
G800F Aerial Gimbal System Combo
By ALIGN
$1,899.99 CAD    
Order Quantity:  
No Picture Available

More like this... Helicopter Accessories, Camera Gimbal
But only from... ALIGN


 Inventory Status Legend
Stock availability for on-line ordering
0
$1,899.99
Warehouse - Mississauga ?
Stock availability for pick up
0
$1,899.99
Warehouse - Mississauga ?
0
$1,899.99
Store - Charlottetown ?
0
$1,899.99
Store - Edmonton ?
0
$1,899.99
Store - Mississauga ?
0
$1,899.99
Store - Ottawa ?
This live feed information is to be used as a general guide to current inventory. There is no guarantee of availablility.
FEATURES
  • Align G800F gimbal is an upgrade product catered specifically for the needs of aerial photography. The included GS850 gimbal controller features high power computing capability, and various control modes to precisely lock into the shooting object, as well as meet the needs of various other aerial photography needs, allowing optimal imagery to be obtained easily. This system must be used in conjunction with Align's APS gyro and T-Rex 800E. Fiberglass composite material matched with high strength aluminum alloy to form the gimbal backbone, featuring high precision, high stability, capable of high payload, and is able to sustain hard landing of helicopter. When paired with 540 degrees DS815 servo and belt transmission design, the gimbal is capable of wider turning angles with higher precision.
  • Unique gimbal support assembly design, with aesthetic pleasing clean look, featuring high precision and slop free and makes the camera lens maintain at the same angle in flight.
  • Shock absorbing dampners designed specifically for Align G800F gimbal system, posses superior vibration dampening effect, and various spring tensions can be used according to payload.
  • Gimbal features Fiberglass composite material composite material matched with high strength aluminum alloy to form the backbone, featuring high precision, high stability, high payload capability, and is able to sustain hard landing of helicopter.
  • Utilizes 540 degrees DS815 high voltage robotic servos, supporting 2s 7.4v input voltage. Special slow start feature to avoid jerky start-ups.
  • Unique gimbal support assembly design, with aesthetic pleasing clean look, featuring high precision and slop free and makes the camera lens maintain at the same angle in flight.
  • Shock absorbing dampners designed specifically for Align G800F gimbal system, posses superior vibration dampening effect, and various spring tensions can be used according to payload.
  • New GS850 Controller support with 5 operating modes and various functions as usual, further equipped with built-in PAN, ROLL and TILT gain dials enable immediate attitude compensating reaction based on different weight of photograph equipment. Featuring much higher degree of control precision.
  • Simple to setup. Complete setup can be done with two steps.
  • Unique rescue mode, to minimize photography equipment damage during a crash.
  • Supports lens zoom in and zoom out feature.
  • Supports shutter activation. Follow the instruction to connect shutter with GS850 controller, shutter can be activated via transmitter stick through GS850.
  • Supports Spektrum/JR satellite receivers and Futaba S.BUS architecture.
  • Upgradeable firmwareinterface, allowing firmware updates through interface cable.
  • Must be used in conjunction with Align APS gyro and 3GX flybarless system, enabling gimbal control system to achieve high stability and excellent controllability.

Specification (DS815 HV ROBOT SERVO)::
Characteris Tic: Soft Start
Rating Voltage:DC4.8~7.4V
Temperature Range:-20℃~60℃(-20°~140℉)
Operating Range:540°(1000~2000us)
Broadband Systems:1500μs
Stall Torque:15kg.cm(4.8V)
Stall Torque:18kg.cm(6V)
Stall Torque:20kg.cm(7.4V)
Motion Speed:0.15sec/60°(4.8V)
Motion Speed:0. 13sec/60°(6V)
Motion Speed:0.11sec/60°(7.4V)
Dimension:40.1x20.1x20.7mm
Weight:66g


Specification(GS850 CONTROLLER) :
Rating Voltage:DC4.8~8.4V
Temperature Range:-20°C~65°C (-4°~140°F )
Operating Current Consumption:55mA@ 6V(ROLL)
Operating Current Consumption:40mA@ 6V(PAN)
Maximum Control range:(ROLL) ±30°
Maximum Control range:(PAN) ±90°
Maximum Control range:(TILT) ±90°
Maximum Control rotation Speed:(ROLL) 60°/ s
Maximum Control rotation Speed:(PAN) 150°/ s
Maximum Control rotation Speed:(TILT) 150°/ s
Dimension:42.7x 30 x 14.2mm
Weight:11g


Accessories:
G800F GIMBAL x 1 set
G800 Gimbal Support Assembly x 1 set
G800 Gimbal Accessory x 1 set
G800 Gimbal Camera Pad x 2 pcs
GS850 Controller x 1 set
DS815 HV Robor Srevo x 3 set
ESC Mount x 1 pcs
G800 Gimbal Shock Absorbers Assembly x 1 set
G800 Gimbal Shock Accessory x 1 set

click image to enlarge
ADDITIONAL PHOTOS
 
4713413977734 4713413977734 
CAD